Toggle switch ATE｜NIDEC COMPONENTS EUROPE GmbH

Toggle switch ATE

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

Subminiature Toggle Switch

A part of this series was discontinued Check affected part number

FeaturesFeatures

Twin-contact clip mechanism for high reliability.
Process sealed structure
Gold-plated contacts.
Terminal pin pitch: 2.54 mm.
Independent detent mechanism ensures lightoperational feel.
UL recognized (Excluding ATE-J series with plastic cap/rocker)

Specifications

Rating	Max.:50mA 60VAC/DC 0.4VA AC/DC Min.:1μA 20mVAC/DC UL:48VAC/DC 50mA
Initial contact resistance	50mΩ Max.(1.5mA 200μVAC)
Dielectric strength	250VAC 1 minute
Insulation resistance	500MΩ min. (500VDC)
Electrical life	10,000 cycles at 0.4VA rating. 50,000 cycles at 0.4VA rating（. D.E type） 30,000 cycles at 0.4VA rating（. F.G.H type）
Mechanical life	D.E type 50,000 cycles F.G.H type 30,000 cycles
Operating temperature range	-20℃～＋85℃
Storage temperature range	-40℃～＋85℃

Part Number Designation

A	TE	1	D -	2	M	3	- 10 - Z
Series	Actuator type TE: Toggle	No. of poles 1: 1 pole 2: 2 poles	SW function D: On-On E: On-Off-On F: On-(On) G: (On)-Off-(On) H: On-Off-(On)	Terminals 2: PC straight 5: R/A 0.2" pitch 6: R/A 0.3" pitch 7: V/M	Actuator shape M: Standard F: Flatted toggle J: Plastic knob type	Bracket 3: Without bracket	Clip mechanism

D -

- 10 - Z

Series

Actuator type

TE:

Toggle

No. of poles

1 pole

2 poles

SW function

D: On-On

E: On-Off-On

F: On-(On)

G: (On)-Off-(On)

H: On-Off-(On)

Terminals

2: PC straight

R/A 0.2" pitch

R/A 0.3" pitch

V/M

Actuator shape

Standard

Flatted toggle

Plastic knob type

Bracket

Without bracket

Clip mechanism

List of Part Numbers

※

P/N indicated with a gray-back in the list below were discontinued with an order deadline of Dec. 20, 2023.

Part No.	Circuit / Toggle shape	Terminals	SW function	CAD
Part No.：ATE1D-2M3-10-Z	SPDT / Standard	PC straight	ON-ON	3D CAD（Any Model）
Part No.：ATE2D-2M3-10-Z	DPDT / Standard	PC straight	ON-ON	3D CAD（Any Model）
Part No.：ATE1D-5M3-10-Z	SPDT / Standard	R/A 0.2 inch pitch	ON-ON	3D CAD（Any Model）
Part No.：ATE2D-5M3-10-Z^☆	DPDT / Standard	R/A 0.2 inch pitch	ON-ON	3D CAD（Any Model）
Part No.：ATE1D-6M3-10-Z	SPDT / Standard	R/A 0.3 inch pitch	ON-ON	3D CAD（Any Model）
Part No.：ATE2D-6M3-10-Z	DPDT / Standard	R/A 0.3 inch pitch	ON-ON	3D CAD（Any Model）
Part No.：ATE1D-2F3-10-Z	SPDT / Flatted toggle	PC straight	ON-ON	3D CAD（Any Model）
Part No.：ATE2D-2F3-10-Z^☆	DPDT / Flatted toggle	PC straight	ON-ON	3D CAD（Any Model）
Part No.：ATE2D-6F3-10-Z^☆	DPDT / Flatted toggle	R/A 0.3 inch pitch	ON-ON	3D CAD（Any Model）
Part No.：ATE1D-2J3-10-Z^☆	SPDT / Plastic knob	PC straight	ON-ON	3D CAD（Any Model）
Part No.：ATE1E-2M3-10-Z	SPDT / Standard	PC straight	ON-OFF-ON	3D CAD（Any Model）
Part No.：ATE2E-2M3-10-Z^☆	DPDT / Standard	PC straight	ON-OFF-ON	3D CAD（Any Model）
Part No.：ATE1E-5M3-10-Z^☆	SPDT / Standard	R/A 0.2 inch pitch	ON-OFF-ON	3D CAD（Any Model）
Part No.：ATE1E-6M3-10-Z	SPDT / Standard	R/A 0.3 inch pitch	ON-OFF-ON	3D CAD（Any Model）
Part No.：ATE1E-2F3-10-Z	SPDT / Flatted toggle	PC straight	ON-OFF-ON	3D CAD（Any Model）
Part No.：ATE1E-2J3-10-Z^★	SPDT / Plastic knob	PC straight	ON-OFF-ON	3D CAD（Any Model）
Part No.：ATE1F-2M3-10-Z	SPDT / Standard	PC straight	ON-(ON)	3D CAD（Any Model）
Part No.：ATE1F-6M3-10-Z	SPDT / Standard	R/A 0.3 inch pitch	ON-(ON)	3D CAD（Any Model）
Part No.：ATE1F-6F3-10-Z^★	SPDT / Flatted toggle	R/A 0.3 inch pitch	ON-(ON)	3D CAD（Any Model）
Part No.：ATE1G-2M3-10-Z	SPDT / Standard	PC straight	(ON)-OFF-(ON)	3D CAD（Any Model）
Part No.：ATE2G-2M3-10-Z^☆	DPDT / Standard	PC straight	(ON)-OFF-(ON)	3D CAD（Any Model）
Part No.：ATE1G-5M3-10-Z^☆	SPDT / Standard	R/A 0.2 inch pitch	(ON)-OFF-(ON)	3D CAD（Any Model）
Part No.：ATE2G-5M3-10-Z^☆	DPDT / Standard	R/A 0.2 inch pitch	(ON)-OFF-(ON)	3D CAD（Any Model）
Part No.：ATE1G-6M3-10-Z^☆	SPDT / Standard	R/A 0.3 inch pitch	(ON)-OFF-(ON)	3D CAD（Any Model）
Part No.：ATE2G-2F3-10-Z^☆	DPDT / Flatted toggle	PC straight	(ON)-OFF-(ON)	3D CAD（Any Model）
Part No.：ATE1G-5F3-10-Z^★	SPDT / Flatted toggle	R/A 0.2 inch pitch	(ON)-OFF-(ON)	3D CAD（Any Model）
Part No.：ATE1G-6F3-10-Z^☆	SPDT / Flatted toggle	R/A 0.3 inch pitch	(ON)-OFF-(ON)	3D CAD（Any Model）
Part No.：ATE1H-2M3-10-Z^☆	SPDT / Standard	PC straight	ON-OFF-(ON)	3D CAD（Any Model）
Part No.：ATE1H-5M3-10-Z^★	SPDT / Standard	R/A 0.2 inch pitch	ON-OFF-(ON)	3D CAD（Any Model）
Part No.：ATE1H-6M3-10-Z^☆	SPDT / Standard	R/A 0.3 inch pitch	ON-OFF-(ON)	3D CAD（Any Model）
Part No.：ATE1H-5F3-10-Z^★	SPDT / Flatted toggle	R/A 0.2 inch pitch	ON-OFF-(ON)	3D CAD（Any Model）
Part No.：ATE1D-7J3-10-Z^★	SPDT / Plastic knob	V/M	ON-ON	3D CAD（Any Model）

☆: Semi-standard products /
★: Made to order products

Optional Accessories

※

P/N indicated with a gray-back in the list below were discontinued with an order deadline of Dec. 20, 2023.

Actuator	Part No.	Color
Color Cap for ATE-2M/5M/6M (for Standard Toggle type)	140000470174	White
	140000470175	Red
	140000470173	Black
	140000470179	Gray
Lever Cap for ATE-#J (for Plastic Knob type)	140000050884	White
	140000050886	Red
	140000050885	Black
Rocker for ATE-#J (for Plastic Knob type)	140000481541	White
	140000481543	Red
	140000481542	Black

Bracket
Applicable	Models	ATM-2M/2F (Toggle shape: Standard or Flatted, Terminals: PC straight)
	Poles	1 pole	2 poles
	Box size	5 mm	7.5 mm	5 mm
Outline dimensions
Part No.		140000640314	140000640315	140000640318

Right Angle Terminals

The space between the terminal rows are available in two dimensions: 0.2 inches (5.08 mm) and 0.3 inches (7.62 mm).
[Example] 0.2-inch pitch: ATE1D-5M3-10-Z 0.3-inch pitch: ATE1D-6M3-10-Z

PC Hole Layouts

◆PC terminal

◆Right Angle terminal・Vertical Mount terminal

Bracket Mounted Dimensions

Soldering Specifications

Manual Soldering
Device ： Soldering iron
380℃, Max.; 3 seconds, Max.
Auto Soldering
Device ： Jet wave type or dip type
275℃, Max.; 6 seconds, Max.　
Pre-heating should be done at temperatures ranging from 80℃　to 120℃ and within 120 seconds
Install the cap/rocker accessory after soldering and cleaning.

Flux Cleaning

Solvent : Fluorine or Alcohol type.
Cleaning after soldering should be done after the terminal temperature falls to 90℃ or below, or after leaving the switch for five minutes or longer at room temperature.

Mounting of Switch

Use PC boards with hole diameter of 1mm.
Do not bend the terminal pins before mounting the switch on the PC board.
After mounting the switch, do not place the device in such a way that the device weight will be applied on to the actuator of the switch.
Do not apply load exceeding 12.7 N to the actuator.