NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

EU-English

×

Pushbutton switch APE

Subminiature Pushbutton Switches

 
FeaturesFeatures
  • Twin-contact clip mechanism for high reliability.

  • Process sealed structure

  • Gold-plated contacts.

  • Terminal pin pitch: 2.54 mm.

  • UL recognized

Specifications

Rating 0.4VA AC/DC
Max:50mA 60VAC/DC
Min:1μA 20mVAC/DC
UL:48VAC/DC 50mA
Initial contact resistance 50mΩ max.(1.5mA 200μVAC)
Dielectric strength 250VAC 1 minute
Initial Insulation resistance 500MΩ min. (500VDC)
Electrical life 10,000 operations at maximum rating.
30,000 operations at 0.4VA
Operating force 0.78±2.94N
Operating temperature range -20~+85℃
Storage temperature range -40~+85℃

Part number designation

APE2F-2M-10-Z

Series code

Actuator shape

PE:Washing push type

Number of poles

1:1pole
2:2poles

Switching function

F: ON -( ON)

Terminal style

2: PC Straight
5: Right angle
(0.2 inch pitch)

6:Right angle
(0.3 inch pitch)

Actuator shape

M: Standard

Clip contact mechanism

 

List of part numbers

Part numberNumber of polesSwitching functionTerminal styleActuator shapeCAD
APE1F-2M-10-Z 1pole ON -(ON) PC Straight Standard
APE2F-2M-10-Z 2poles ON -(ON) PC Straight Standard
★APE1F-5M-10-Z 1pole ON -(ON) Right angle(0.2 inch pitch) Standard
APE1F-6M-10-Z 1pole ON -(ON) Right angle(0.3 inch pitch) Standard
☆APE2F-6M-10-Z 2poles ON -(ON) Right angle(0.3 inch pitch) Standard

☆:Semi-standard products. ★:Made to order products

Mounting of Switch

  • Use PC boards with hole diameter of 1mm.
  • Do not bend the terminal pins before mounting the switch on the PC board.
  • After mounting the switch, do not place the device in such a way that the device weight will be applied on to the actuator of the switch.
  • Do not apply load exceeding 12.7 N to the actuator.
    If load exceeding 12.7 N is expected to be applied to the actuator, please use a Bracket (optional accessory sold separately).
    Maximum load will be 29.4 N when a Bracket is used.
  • Use Bracket 140000640314 or 140000640318 for side-byside mounting.
  • To instance mounting strength, use bracket 140000640315.
  • PC Hole Layouts will change depending on the Bracket.

Soldering Specifications

  • Manual Soldering
    Device:Soldering iron
    380°C, Max.; 3 seconds, Max.
  • Auto Soldering
    Device:Jet wave type or dip type
    275°C, Max.; 6 seconds, Max.
    ・Pre-heating should be done at temperatures ranging from 80°C to 120°C and within 120 seconds.

Flux Cleaning

  • Solvent :Fluorine or Alcohol type.
  • Cleaning after soldering should be done after the terminal temperature falls to 90℃ or below, or after leaving the
    switch for five minutes or longer at room temperature.
  • Do not use ultrasonic cleaning.

Environmental Data

●The above contents and descriptions are subject to change without notice. 

Products

×

page top