NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

US-English

×

Lever&rocker switch 8HD

Lever & Rocker Switches

Part of this series will be discontinued shotlyCheck affected part number
 
 
FeaturesFeatures
 
  • The 8HD Lever & Rocker switch is a dustproof version of the 8H type and is best suited for use in the adverse environment where a lot of dust exists. The lever, rocker, and mounting frame are available in four matted colors. Choose the suitable one for the panel design.

 
  • ❶Dust proof structure
    ❷Snap-in mounting on panel
    (The hole layout is same as the 8H.)
    ❸The side-by-side mounting will not cause gap between switches.
    ❹Colorful mat-finished levers and rockers that enhance the panel design can be mounted.
 

Specifications

Rating Max. Silver: 125VAC 6A / 250VAC 3A / 30VDC 4A
Gold plated:20VDC 25mA
Initial contact resistance Silver: 10mΩ Max.(2~4VDC 1A)
Gold plated:20mΩ Max.(200 μVAC 1.5mA)
Initial dielectric strength AC1500V 1Minute
Initial insulation resistance 1000MΩ Min. (500VDC)
Electrical life Altternate type: 50,000 cycles 
Momentary type: 25,000 cycles
Operating temperature range -30~+85℃
Strage temperature range -40~+85℃

Part Number Designation

8HD1011C- Z

Series

Actuator shape

HD: 

Lever / Rocker
(Dust proof type)

No. of poles

1: 1 pole

2: 2 poles

Switching function

01: ON-ON

02: ON-OFF-ON

04: (ON)-OFF-(ON)

Terminal style

1: Solder

2: PC straight

Contact material / Plating

Blank: 

Bs+Ag or Cu+Ag / Silver plated (Ag)

Bs=Brass, Ag=Silver, Cu=Copper

◆Terminals

List of Part Numbers

 

 

 
 
A Part number indicated with a gray-back in the list below was discontinued with an order deadline of Dec. 20, 2023.
Part No.No. of polesTerminalsSW functionCAD
Part No.:8HD1011-Z 1 pole Solder ON-ON
Part No.:8HD1041-Z 1 pole Solder (ON)-OFF-(ON)
Part No.:8HD2011-Z 2 poles Solder ON-ON
Part No.:8HD2021-Z 2 poles Solder ON-OFF-ON
8HD2012-Z 2 poles PC端子 ON-ON
☆: Semi-standard products / 
★: Made to order products
Optional Accessories
A part number indicated with a gray-back in the list below was discontinued with an order deadline of Dec. 20, 2023.
AccessoryPart No.ColorOutline dimensions
Mounting Frame (+Stainless-steel plate) 140000340127
+140000600181
White
140000340128
+140000600181
Red
140000340129
+140000600181
Black
140000340130
+140000600181
Gray
Stainless-steel plate 140000600181
Standard Accessories
AccessoryPart No.ColorOutline dimensions
Lever 140000050558 White
140000050559 Red
140000050560 Black
140000050561 Gray
Rocker 140000480594 White
140000480595 Red
140000480596 Black
140000480597 Gray
Specify either of the lever or the rocker in part number.

Panel Cut-Out Dimensions

Lever / Rocker and Mounting Frame Installation Procedure

  • ◆Lever and Rocker
        

  • ◆Mounting frame

    To mount the switch on the panel, press in the switch from the panel side with uniform pressure on the right and left.
    To mount the switch on the panel, press in the switch from the panel side with uniform pressure on the right and left.

PC Hole Layouts

Handling Precautions

◆Soldering Specifications
  • Manual Soldering
    Device : Soldering iron
    ①420℃, Max.; 3 sec., Max.
  • Auto Soldering
    ②275℃ ± 10℃, Max.; 5 seconds, Max.
    Note that the above-stated soldering conditions should be applied to the PC terminal type only.
◆Flux Cleaning
  • For the solvent, use the fluorine- or alcohol-based solvent.
    Solvent: Fluorine or Alcohol type
  • Since the 8 Switch Series switches are not waterproof-structured, if the PC board is to be cleaned, clean the soldering surface of substrate with a brush so that the switch is not exposed to the cleaning solution.
◆Mounting
  • Do not bend the terminals before mounting the switch on the PC board.
  • After mounting the switch, do not place the device in such a way that the device weight will be applied on the knob of the switch.
  • To fix the PC terminal type, solder it on the PC board after fixing the switch body on the panel with the screw.
●The above contents and descriptions are subject to change without notice. 

Products

×

page top