Rotary coded switch SC-1000/2000｜NIDEC COMPONENTS, Inc.

Rotary coded switch SC-1000/2000

SC-1000/2000

SC-1000/2000

●To buy this product, please go to the following Online Web stores.

Lead free, thin (3.9 mm) 10 mm square

RoHS compliant
Fine click with metallic spring
Low profile of 3.9 mm makes perfect for high density board mounting applications
Gold plated contact provides excellent reliability
Cross and minus slot are available
Terminal pin arrangement 4-1

Standard Specifications

Circuit type	BCD (Real code, complementary code) BCH (Real code, complementary code)
Operating temperature range	− 40 ~ 85 °C
Storage temperature range	− 40 ~ 85 °C
Sealing	Washable
Net weight	Without knob Top setting　0.63 g With knob Top setting　0.73 g Without knob Side setting　0.76 g With knob Side setting　0.86 g

Electrical Characteristics

Contact rating	Non-switching:DC50 V 100 mA Switching:DC5 V 100 mA Minimum:DC20 mV 1 μA
Contact resistance	100 mΩ maximum
Insulation resistance	1000 MΩ (DC100 V) minimum
Dielectric strength	AC250 V, 60 s

Mechanical Characteristics

No. of positions	16 (SC-1000), 10 (SC-2000)
Adjustment torque	4 ~ 20 mN·m {41 ~ 204 gf·cm}
Stepping angle	22.5° (SC-1000), 36° (SC-2000)
Terminal strength (Through hole pin only)	10 N {1.02 kgf} minimum
Stop strength (With knob only)	10 N {1.02 kgf}, 10 s
Solderability	245 ± 3 °C, 2 ~ 3 s
Soldering heat	Gull wing： Reflow : Peak temperature 255 °C (Please refer to the profile below.) Manual soldering： 350 ± 10 °C, 3 ~ 4 s Through hole pin： Flow : 260 ± 3 °C as the temperature in a pot of molten solder, immer sion from head of terminal to backside of board 5 ~ 6 s, two times maximum Manual soldering： 380 ± 10 °C, 3 ~ 4 s
Shear (Gull wing only)	5 N {0.51 kgf}, 10 s
Substrate bending (Gull wing only)	Width 90 mm, bend 3 mm, 5 s, 1 time
Pull-off strength (Gull wing only)	5 N {0.51 kgf}, 10 s

Environmental Characteristics

Vibration	Amplitude 1.5 mm or　Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each
Shock	490 m/s2, 11 ms　6 directions for 3 times each
Humidity	Resistance load DC50V 100mA40 °C, Relative humidity 90 ~ 95 %, 240 h
Load life	20000 steps
High temperature exposure	85 °C, 96 h
Low temperature exposure	− 40 °C, 96 h
Thermal shock	− 40 (0.5 h) ~ 85 °C ( 0.5 h ), 5 cycles
Solvent resistance(Dipping)	Solvent : IPA (Isopropyl alchol) Temperature : 23 ± 5 °C Time : 5 ± 0.5 minutes

Part number designation

SC -	１	０	１	０	T	W
Series name	No. of positions 1：16 positions 2：10 positions	Shape of rotor 0：Without knob (Minus slot) 1：With knob (with extended shaft) 2：Without knob (Cross slot)	Code format 1：Real code (Rotor color Yellow) 3：Complementary code (Rotor color Red)	Setting position 0: Top setting 1: Side setting	Form of packaging T：Taping (Gull wing type only) W：Tray packaging Blank：Bulk in plastic bag	Shape of terminal B：Gull wing (Top setting type only) Blank : Through hole pin (Snap-in terminal pin)

SC -

１

０

１

０

Series name

No. of positions

1：16 positions
2：10 positions

Shape of rotor

0：Without knob (Minus slot)
1：With knob (with extended shaft)

2：Without knob (Cross slot)

Code format

1：Real code (Rotor color Yellow)

3：Complementary code (Rotor color Red)

Setting position

0: Top setting
1: Side setting

Form of packaging

T：Taping (Gull wing type only)

W：Tray packaging

Blank：Bulk in plastic bag

Shape of terminal

B：Gull wing (Top setting type only)

Blank : Through hole pin (Snap-in terminal pin)

List of part numbers

Part number	Code format	Shape of rotor	Setting position	Shape of terminal	Pieces in package	CAD
SC-2010	BCD, Real code (Rotor color Yellow)	Without knob (Minus slot)	Top setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-2010W	BCD, Real code (Rotor color Yellow)	Without knob (Minus slot)	Top setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-2110	BCD, Real code (Rotor color Yellow)	With knob (with extended shaft)	Top setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-2110W	BCD, Real code (Rotor color Yellow)	With knob (with extended shaft)	Top setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-2210	BCD, Real code (Rotor color Yellow)	Without knob (Cross slot)	Top setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-2210W	BCD, Real code (Rotor color Yellow)	Without knob (Cross slot)	Top setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-2011	BCD, Real code (Rotor color Yellow)	Without knob (Minus slot)	Side setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-2011W	BCD, Real code (Rotor color Yellow)	Without knob (Minus slot)	Side setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-2111	BCD, Real code (Rotor color Yellow)	With knob (with extended shaft)	Side setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-2111W	BCD, Real code (Rotor color Yellow)	With knob (with extended shaft)	Side setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-2211	BCD, Real code (Rotor color Yellow)	Without knob (Cross slot)	Side setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-2211W	BCD, Real code (Rotor color Yellow)	Without knob (Cross slot)	Side setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-2010B	BCD, Real code (Rotor color Yellow)	Without knob (Minus slot)	Top setting	Gull wing (Top setting type only)	25 pcs./pack	3D CAD（Any Model）
SC-2010WB	BCD, Real code (Rotor color Yellow)	Without knob (Minus slot)	Top setting	Gull wing (Top setting type only)	50 pcs./tray	3D CAD（Any Model）
SC-2010TB	BCD, Real code (Rotor color Yellow)	Without knob (Minus slot)	Top setting	Gull wing (Top setting type only)	500 pcs./reel	3D CAD（Any Model）
SC-2210B	BCD, Real code (Rotor color Yellow)	Without knob (Cross slot)	Top setting	Gull wing (Top setting type only)	25 pcs./pack	3D CAD（Any Model）
SC-2210WB	BCD, Real code (Rotor color Yellow)	Without knob (Cross slot)	Top setting	Gull wing (Top setting type only)	50 pcs./tray	3D CAD（Any Model）
SC-2210TB	BCD, Real code (Rotor color Yellow)	Without knob (Cross slot)	Top setting	Gull wing (Top setting type only)	500 pcs./reel	3D CAD（Any Model）
SC-2030	BCD, Complementary code (Rotor color Red)	Without knob (Minus slot)	Top setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-2030W	BCD, Complementary code (Rotor color Red)	Without knob (Minus slot)	Top setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-2130	BCD, Complementary code (Rotor color Red)	With knob (with extended shaft)	Top setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-2130W	BCD, Complementary code (Rotor color Red)	With knob (with extended shaft)	Top setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-2230	BCD, Complementary code (Rotor color Red)	Without knob (Cross slot)	Top setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-2230W	BCD, Complementary code (Rotor color Red)	Without knob (Cross slot)	Top setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-2230W	BCD, Complementary code (Rotor color Red)	Without knob (Minus slot)	Side setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-2031W	BCD, Complementary code (Rotor color Red)	Without knob (Minus slot)	Side setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-2131	BCD, Complementary code (Rotor color Red)	With knob (with extended shaft)	Side setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-2131W	BCD, Complementary code (Rotor color Red)	With knob (with extended shaft)	Side setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-2231	BCD, Complementary code (Rotor color Red)	Without knob (Cross slot)	Side setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-2231W	BCD, Complementary code (Rotor color Red)	Without knob (Cross slot)	Side setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-2030B	BCD, Complementary code (Rotor color Red)	Without knob (Minus slot)	Top setting	Gull wing (Top setting type only)	25 pcs./pack	3D CAD（Any Model）
SC-2030WB	BCD, Complementary code (Rotor color Red)	Without knob (Minus slot)	Top setting	Gull wing (Top setting type only)	50 pcs./tray	3D CAD（Any Model）
SC-2030TB	BCD, Complementary code (Rotor color Red)	Without knob (Minus slot)	Top setting	Gull wing (Top setting type only)	500 pcs./reel	3D CAD（Any Model）
SC-2230B	BCD, Complementary code (Rotor color Red)	Without knob (Cross slot)	Top setting	Gull wing (Top setting type only)	25 pcs./pack	3D CAD（Any Model）
SC-2230WB	BCD, Complementary code (Rotor color Red)	Without knob (Cross slot)	Top setting	Gull wing (Top setting type only)	50 pcs./tray	3D CAD（Any Model）
SC-2230TB	BBCD, Complementary code (Rotor color Red)	Without knob (Cross slot)	Top setting	Gull wing (Top setting type only)	500 pcs./reel	3D CAD（Any Model）
SC-1010	BCH,Real code (Rotor color Yellow)	Without knob (Minus slot)	Top setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-1010W	BCH,Real code (Rotor color Yellow)	Without knob (Minus slot)	Top setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-1110	BCH,Real code (Rotor color Yellow)	With knob (with extended shaft)	Top setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-1110W	BCH,Real code (Rotor color Yellow)	With knob (with extended shaft)	Top setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-1210	BCH,Real code (Rotor color Yellow)	Without knob (Cross slot)	Top setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-1210W	BCH,Real code (Rotor color Yellow)	Without knob (Cross slot)	Top setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-1011	BCH,Real code (Rotor color Yellow)	Without knob (Minus slot)	Side setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-1011W	BCH,Real code (Rotor color Yellow)	Without knob (Minus slot)	Side setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-1111	BCH,Real code (Rotor color Yellow)	With knob (with extended shaft)	Side setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-1111W	BCH,Real code (Rotor color Yellow)	With knob (with extended shaft)	Side setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-1211	BCH,Real code (Rotor color Yellow)	Without knob (Cross slot)	Side setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-1211W	BCH,Real code (Rotor color Yellow)	Without knob (Cross slot)	Side setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-1010B	BCH,Real code (Rotor color Yellow)	Without knob (Minus slot)	Top setting	Gull wing (Top setting type only)	25 pcs./pack	3D CAD（Any Model）
SC-1010WB	BCH,Real code (Rotor color Yellow)	Without knob (Minus slot)	Top setting	Gull wing (Top setting type only)	50 pcs./tray	3D CAD（Any Model）
SC-1010TB	BCH,Real code (Rotor color Yellow)	Without knob (Minus slot)	Top setting	Gull wing (Top setting type only)	500 pcs./reel	3D CAD（Any Model）
SC-1210B	BCH,Real code (Rotor color Yellow)	Without knob (Cross slot)	Top setting	Gull wing (Top setting type only)	25 pcs./pack	3D CAD（Any Model）
SC-1210WB	BCH,Real code (Rotor color Yellow)	Without knob (Cross slot)	Top setting	Gull wing (Top setting type only)	50 pcs./tray	3D CAD（Any Model）
SC-1210TB	BCH,Real code (Rotor color Yellow)	Without knob (Cross slot)	Top setting	Gull wing (Top setting type only)	500 pcs./reel	3D CAD（Any Model）
SC-1030	BCH, Complementary code (Rotor color Red)	Without knob (Minus slot)	Top setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-1030W	BCH, Complementary code (Rotor color Red)	Without knob (Minus slot)	Top setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-1130	BCH, Complementary code (Rotor color Red)	With knob (with extended shaft)	Top setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-1130W	BCH, Complementary code (Rotor color Red)	With knob (with extended shaft)	Top setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-1230	BCH, Complementary code (Rotor color Red)	Without knob (Cross slot)	Top setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-1230W	BCH, Complementary code (Rotor color Red)	Without knob (Cross slot)	Top setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-1031	BCH, Complementary code (Rotor color Red)	Without knob (Minus slot)	Side setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-1031W	BCH, Complementary code (Rotor color Red)	Without knob (Minus slot)	Side setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-1131	BCH, Complementary code (Rotor color Red)	With knob (with extended shaft)	Side setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-1131W	BCH, Complementary code (Rotor color Red)	With knob (with extended shaft)	Side setting	PThrough hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-1231	BCH, Complementary code (Rotor color Red)	Without knob (Cross slot)	Side setting	Through hole pin (Snap-in terminal pin)	25 pcs./pack	3D CAD（Any Model）
SC-1231W	BCH, Complementary code (Rotor color Red)	Without knob (Cross slot)	Side setting	Through hole pin (Snap-in terminal pin)	50 pcs./tray	3D CAD（Any Model）
SC-1030B	BCH, Complementary code (Rotor color Red)	Without knob (Minus slot)	Top setting	Gull wing (Top setting type only)	25 pcs./pack	3D CAD（Any Model）
SC-1030WB	BCH, Complementary code (Rotor color Red)	Without knob (Minus slot)	Top setting	Gull wing (Top setting type only)	50 pcs./tray	3D CAD（Any Model）
SC-1030TB	BCH, Complementary code (Rotor color Red)	Without knob (Minus slot)	Top setting	Gull wing (Top setting type only)	500 pcs./reel	3D CAD（Any Model）
SC-1230B	BCH, Complementary code (Rotor color Red)	Without knob (Cross slot)	Top setting	Gull wing (Top setting type only)	25 pcs./pack	3D CAD（Any Model）
SC-1230WB	BCH, Complementary code (Rotor color Red)	Without knob (Cross slot)	Top setting	Gull wing (Top setting type only)	50 pcs./tray	3D CAD（Any Model）
SC-1230TB	BCH, Complementary code (Rotor color Red)	Without knob (Cross slot)	Top setting	Gull wing (Top setting type only)	500 pcs./reel	3D CAD（Any Model）

Documents

Environmental Data

RoHS CoC

●The above contents and descriptions are subject to change without notice.

Return previous page