Detect switch CL-DA
-
●To buy this product, please go to the following Online Web stores.
With the same shape for A-TCA standard switch
- High reliability by Gold contact
- RoHS compliant
- For detection of operation from side direction
- Automatic mounting possible
- Low profile design of 2mm
Standard Specifications
| Operating temp. range | －40 ~ 85 °C |
|---|---|
| Storage temp. range | －40 ~ 85 °C |
| Sealing | Non-washable |
| Net weight | 0.093 g |
Electrical characteristics
| Contact rating | Switching DC12 V, 100 mA Minimum DC20 mV, 1 μA |
|---|---|
| Contact resistance | 100 mΩ maximum |
| Insulation resistance | 100 MΩ (DC100 V) minimum |
| Dielectric strength | AC250 V, 60s |
Mechanical characteristics
| Switching function | OFF － (ON) / ON － (OFF) |
|---|---|
| Stroke | Pre-travel: 0.35mm Over-travel: 2.0mm Total: 2.35mm |
| Operating force | 0.75N {0.075 kgf} |
| Stop strength | 5N {0.51 kgf}, 60s |
| Solderability | 245 ± 3 °C, 2~3s |
| Soldering heat | Reflow：260 °C (Peak temperature) （Please refer to the profile below） |
| Shear (Adhesion) | 5N {0.51 kgf} 10s |
| Substrate bending | Width 90 mm, bend 3mm, 5s, 1 time |
| Pull-off strength | 5N {0.51 kgf} 10s |
{ } : Reference only
■＜Reflow profile for soldering heat evaluation＞
Environmental characteristics
| Vibration | Amplitude 1.5 mm（Total amplitude）or Acceleration 98 m/s2, 10-500 Hz, 3 directions for 10 cycles each |
|---|---|
| Shock | 490 m/s2, 11 ms 6 directions for 3 times each |
| Load life | Continuous load 50,000cycles DC12 V, 100 mA |
| Humidity | −10 ~ 65 °C, Relative humidity 0 ~ 96 %, 24 h for 10 cycles |
| High temp. exposure | 85 °C, 96 h No load |
| Low temp. exposure | −40 °C, 96 h No load |
| Thermal shock | −40 (0.5 h) ~ 85 °C (0.5 h), 5 cycles |
Part number designation
| CL-DA- | 1 | C | B4- | A | 2 | T |
|---|---|---|---|---|---|---|
|
Series name |
No. of bits 01: 1 bit |
Switching function B:ON (OFF) C:OFF (ON) |
Shape of terminal B4: Gull wing |
Shape of actuator A：Standard |
Contact material 2：Gold |
Form of packaging T ：Taping (Reel) |
List of part numbers
| Part numbers | No. of bits | Switching function | Shape of terminal | Shape of actuator | Contact material | Form of packaging | CAD |
|---|---|---|---|---|---|---|---|
| CL-DA-1BB4-A2T | 1 bit | ON − (OFF) | Gull wing | Standard | Gold | Taping (Reel) | |
| CL-DA-1CB4-A2T | 1 bit | OFF − (ON) | Gull wing | Standard | Gold | Taping (Reel) |
Outline dimensions
Unless otherwise specified, tolerance : ± 0.3 (Unit : mm)
Recommended PCB Pad Dimensions
(Unit : mm)
Documents
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
