Pushbutton switch 8R-N｜NIDEC COMPONENTS, Inc.

Pushbutton switch 8R-N

The 8R Soft-Touch Pushbutton switches has a unique snap action structure which provides light and soft tactile
feel.
The short travel distance (Alternate action: 2.5 mm,Momentary: 1 mm) and the low-profile design make the 8R
series suitable for applications where panel space is limited.
Silver or gold-plated contacts
Epoxy resin case UL94V-0 self-extinguishing epoxy.
Insulation between terminal and ground: 4 mm minimum.
Prevention of flux entry The epoxy resin seal on bottom of the switch helps prevent short-circuiting between poles ensuring high reliability
Insulation barrier: Insulation barrier design between poles helps prevent short-circuiting between poles ensuring high reliability.

Rating	Silver plated:3A 125VAC （Resistive load） Gold plated:60mA 30VDC max.（Resistive load）
Initial contact resistance	Silver plated:10mΩ max（. 1A 2～4VDC） Gold plated:20mΩ max（. 5mA 200μVAC）
Initial Dielectric strength	1,000VAC 1 minute
Initial insulation resistance	1,000MΩ min. （500VDC）
Electrical life	25,000 operations（ 50,000 operations:Gold plate）
Operating temperature range	－20℃～＋85℃
Storage temperature range	－40℃～＋85℃
Operating force	Alternate type　8R101■－N－Z：3.92±1.96N/8R201■－N－Z：4.9±2.94N Momentaly type 8R102■－N－Z2.94±0.98N/8R202■－N－Z 4 . 9 ± 1.96N

8	R	1	01	1	B	-	Z
Series code	Actuator shape N:Standard P:Splash proof Y:Mustang R:Soft Touch W:Snap-in	Number of poles 1: 1 2: 2	Switching function 01: ON-ON 02: ON-(ON)	Terminal style 1: Solder 2: PC/Straight	Contact material /Plating None：Bs+Ag or Cu+Ag/Ag B: Bs or Cu/Ni+Au C:Bs+Ag or Cu+Ag/Ni+Au

Note ：Some combinations may not be available. Please check the "Tableof Part Numbers" for each series.

Part number	Plating	Number of poles	Switching function	Terminal style	CAD
8R1011－N－Z	Silver plated	1 pole	ON － ON	Solder	3D CAD（Any Model）
★8R2011－N－Z	Silver plated	2 poles	ON － ON	Solder	3D CAD（Any Model）
8R1021－N－Z	Silver plated	1 pole	ON －（ON）	Solder	3D CAD（Any Model）
8R1021B－N－Z	Gold plated	1 pole	ON －（ON）	Solder	3D CAD（Any Model）
8R2021－N－Z	Silver plated	2 poles	ON －（ON）	Solder	3D CAD（Any Model）
★8R2021B－N－Z	Gold plated	2 poles	ON －（ON）	Solder	3D CAD（Any Model）
8R1022－N－Z	Silver plated	1 pole	ON －（ON）	PC Straight	3D CAD（Any Model）
☆8R1022B－N－Z	Gold plated	1 pole	ON －（ON）	PC Straight	3D CAD（Any Model）
8R2022－N－Z	Silver plated	2 poles	ON －（ON）	PC Straight	3D CAD（Any Model）
★8R2022B－N－Z	Gold plated	2 poles	ON －（ON）	PC Straight	3D CAD（Any Model）

★：Made to order products. ☆：Semi-standard products. （ON）：Momentary.

Manual soldering
Device：Solder iron
①420℃ Max. 3 sec. Max.
Auto soldering
②The above-stated soldering conditions shall apply only to switches with straight terminals. Auto soldering is not possible with right-angle terminals.
Switches with right-angle terminals should be soldered manually according to the conditions specified in (1) above.
When putting the switches through an aging process after they were soldered onto the printing board or after installed into a complete end product, be sure to remove the buttons ofthe switches.,

Do not bend the terminals before mounting the switch on the PC board.
After mounting the switch, do not place the device in such a way that the device weight will be applied on to the actuator of the switch.
For switches with straight terminals, solder the switch on the PC board after fixing the switch on the panel with a nut.

Solvent : Fluorine or Alcohol type.
8A/B/C/D/E/F/J/S series are not washable. To wash the PC board, clean the soldering surface of the PC board
with a brush so that the switch is not exposed to the cleaning solution.