Pushbutton switch SMAP
-
●To buy this product, please go to the following Online Web stores.
Surface Mount Pushbutton Switches
FeaturesFeatures
-
Compatible with Reflow Soldering
-
Washable
-
Gold-Plated Contacts for Low Current Application
-
Clip Contact Mechanism for High Contact Reliability
Specifications
| Rating Max. | 0.4VA（ 28VDC max.）(Resistive load） |
|---|---|
| Rating Min. | 1μA 20mVDC(Resistive load） |
| Initial contact resistance | 100mΩ max.(1.5mA 200 μVAC） |
| Dielectric strength | 250VAC 1minute |
| Initial insulation resistance | 500MΩ min.(250VDC） |
| Stroke | 1.4mm |
| Operating force | 1.47±0.98 N |
| Electrostatic capacity | 5pF max.（AC voltage of 1M ± 200 Hz） |
| Electrical life | 10,000 operations at max. rating 30,000 operations at min. rating |
| Switch timing | Non-shorting |
| Operating temperature range | －20～＋80℃ |
| Storage temperature range | －40～＋80℃ |
Part Number Designation
| SMAP | 1 | F - | 2 | M | - E | - Z |
|---|---|---|---|---|---|---|
|
Series |
No. of poles 1: 1 pole 2: 2 poles |
SW function F: ON-(ON) |
Terminals 2: PC straight 5: R/A |
Actuator shape M: Standard |
Packaging Blank: Stick E: Emboss taping |
|
List of Part Numbers
※
Part Numbers indicated with a gray-back in the list below were discontinued with an order deadline of Dec. 20, 2023.
| Part No. | No. of poles | SW function | Terminal | Packaging | Pieces in package | CAD |
|---|---|---|---|---|---|---|
| Part No.：SMAP1F-2M-Z | 1 pole | ON－(ON) | PC straight | Stick | 50 pcs./stick | |
| Part No.：SMAP2F-2M-Z | 2 poles | ON－(ON) | PC straight | Stick | 50 pcs./stick | |
| Part No.：SMAP1F-5M-Z | 1 pole | ON－(ON) | R/A | Stick | 50 pcs./stick | |
| Part No.：SMAP2F-5M-Z | 2 poles | ON－(ON) | R/A | Stick | 50 pcs./stick | |
| Part No.：SMAP1F-5M-E-Z | 1 pole | ON－(ON) | R/A | Emboss taping | 500 pcs./reel |
Pad Layouts (Top view)
Circuit Diagrams
●In a single-pole configuration, terminals (C2), (3) and (4) are not connected.
Soldering Specifications
- Manual Soldering
Device：Soldering iron 380°C ±10°C; 3±0.5 seconds
- Reflow Soldering
Device：Inline or batch system
●Apply reflow soldering only once.
Flux Cleaning
- Solvent :Fluorine or Alcohol type
- Cleaning after soldering should bedone after the terminal temperature falls to 90°C or below, or after leaving the switch for five minutes or longer at room temperature.
- Do not use ultrasonic cleaning.
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
