NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

US-English

×

Lever&rocker switch 8H

Lever & Rocker Switches

A Part of this series was discontinuedCheck affected part number
 
 
FeaturesFeatures

The 8H Lever & Rocker Switches feature the snap-in mount type on the panel, which enables side-by-side mounting. For the actuator, either of the lever or the rocker can be chosen according to applications and four colors are available for the actuator and the mounting frame, respectively. Choose the suitable one for the panel design.

Specifications

Rating Max. Silver: 125 VAC 6 A / 250 VAC 3 A / 30 VDC 4 A
Gold plated:20 VDC 25 mA
Initial contact resistance Silver: 10 mΩ Max. (2~4 VDC 1 A)
Gold plated: 20 mΩ Max. (200 μVAC 1.5 mA)
Initial dielectric strength 1500 VAC 1 Minute
Initial insulation resistance 1000 MΩ Min. (500 VDC)
Electrical life Altternate type: 50,000 cycles 
Momentary type: 25,000 cycles
Operating temperature range ー30~+85 ℃
Strage temperature range ー40~+85 ℃

Part Number Designation

8H1011C- Z

Series

Actuator shape

H: Lever / Rocker

No. of poles

1: 1 pole

2: 2 poles

3: 3 poles

4: 4 poles

Switching function

01: ON-ON

02: ON-OFF-ON

04: (ON)-OFF-(ON)

06: ON-(ON)

Terminal style

1: Solder

2: PC straight

Contact material / Plating

Blank: 

Bs+Ag or Cu+Ag / Silver plated (Ag)

/ Silver plated (Ag)

C: 

Bs+Ag or Cu+Ag / Gold plated (Ni+Au)

/ Gold plated (Ni+Au)

Bs=Brass, Ag=Silver, Cu=Copper,
Ni=Nickel, Au=Gold

◆Terminals

List of Part Numbers

 

 

 
 
A part number indicated with a gray-back in the list below was discontinued with an order deadline of Dec. 20, 2023.
Part No.No. of polesTerminalsSW functionCAD
Part No.:8H1011-Z 1 pole Solder ON-ON
Part No.:8H1011C-Z 1 pole Solder (Gold plated) ON-ON
Part No.:8H1021-Z 1 pole Solder ON-OFF-ON
Part No.:8H1021C-Z 1 pole Solder (Gold plated) ON-OFF-ON
Part No.:8H1041-Z 1 pole Solder (ON)-OFF-(ON)
Part No.:8H1061-Z 1 pole Solder ON-(ON)
Part No.:8H1012-Z 1 pole PC Straight ON-ON
Part No.:8H2011-Z 2 poles Solder ON-ON
Part No.:8H2021-Z 2 poles Solder ON-OFF-ON
Part No.:8H2041-Z 2 poles Solder (ON)-OFF-(ON)
Part No.:8H2012-Z 2 poles PC Straight ON-ON
Part No.:8H2062-Z 2 poles PC Straight ON-(ON)
☆: Semi-standard products / 
★: Made to order products / 
▲: Ask for details
Accessories
For standard accessories, specify either of the lever or the rocker in part number.

Panel Cut-Out Dimensions

Lever / Rocker and Mounting Frame Installation Procedure

  • ◆Lever and Rocker
        

  • ◆Mounting frame

    To mount the switch on the panel, press in the switch from the panel side with uniform pressure on the right and left.
    To mount the switch on the panel, press in the switch from the panel side with uniform pressure on the right and left.

PC Hole Layouts

Handling Precautions

◆Soldering Specifications
  • Manual Soldering
    Device : Soldering iron
    ①420℃, Max.; 3 sec., Max.
  • Auto Soldering
    ②275℃ ± 10℃, Max.; 5 seconds, Max.
    Note that the above-stated soldering conditions should be applied to the PC terminal type only.
◆Flux Cleaning
  • For the solvent, use the fluorine- or alcohol-based solvent.
    Solvent: Fluorine or Alcohol type
  • Since the 8 Switch Series switches are not waterproof-structured, if the PC board is to be cleaned, clean the soldering surface of substrate with a brush so that the switch is not exposed to the cleaning solution.
◆Mounting
  • Do not bend the terminals before mounting the switch on the PC board.
  • After mounting the switch, do not place the device in such a way that the device weight will be applied on the knob of the switch.
  • To fix the PC terminal type, solder it on the PC board after fixing the switch body on the panel with the screw.

Environmental Data

●The above contents and descriptions are subject to change without notice. 

Products

×

page top