Toggle switch FT
-
●To buy this product, please go to the following Online Web stores.
Ultra-Miniature Toggle Switch
FeaturesFeatures
-
Ultra-miniature toggle switch for high density mounting.
-
Washable.
-
Terminal pin pitch : 2.54 mm.
-
Independent detent mechanism ensures light operational feel.
-
Clip contact mechanism for long-term contact reliability.
-
Gold-plated contacts.
Part Number Designation
| F | T | ２ | D - | ２ | M | - Z |
|---|---|---|---|---|---|---|
|
Series |
Actuator type T: Toggle |
No. of poles 1: 1 pole |
Switching function D: ON-ON |
Terminal style 2: PC straight |
Actuator shape M: スタンダード |
|
◆Terminal style
List of Part Numbers
※
Part numbers indicated with a gray-back in the list below were discontinued with an order deadline of Dec. 20, 2023.
| Part No. | Circuit | Terminals | SW function | CAD |
|---|---|---|---|---|
| Part No.：FT1D-2M-Z | SPDT | PC straight | ON-ON | |
| Part No.：FT2D-2M-Z | DPDT | PC straight | ON-ON | |
| Part No.：FT1E-2M-Z☆ | SPDT | PC straight | ON-OFF-ON | |
| Part No.：FT2E-2M-Z☆ | DPDT | PC straight | ON-OFF-ON | |
| Part No.：FT1F-2M-Z☆ | SPDT | PC straight | ON-(ON) | |
| Part No.：FT2F-2M-Z★ | DPDT | PC straight | ON-(ON) | |
| Part No.：FT1G-2M-Z★ | SPDT | PC straight | (ON)-OFF-(ON) | |
| Part No.：FT1D-5M-Z | SPDT | PC R/A |
ON-ON |
|
| Part No.：FT2D-5M-Z☆ | DPDT | PC R/A |
ON-ON |
|
| Part No.：FT1E-5M-Z | SPDT | PC R/A | ON-OFF-ON | |
| Part No.：FT2E-5M-Z★ | DPDT | PC R/A | ON-OFF-ON | |
| Part No.：FT1D-4M-Z☆ | SPDT | PC V/M | ON-ON | |
| Part No.：FT2D-4M-Z | DPDT | PC V/M | ON-ON | |
| Part No.：FT1E-4M-Z★ | SPDT | PC V/M | ON-OFF-ON | |
| Part No.：FT2E-4M-Z★ | DPDT | PC V/M | ON-OFF-ON |
☆: Semi-standard products /
★: Made to order products
★: Made to order products
Soldering Specifications
- Manual Soldering Device：Soldering iron 380℃, Max.; 3 seconds, Max.
- Auto Soldering Device：Jet wave type or dip type 275℃, Max.; 6 seconds, Max.
- Pre-heating should be done at temperatures from 80 to 120℃ and within 120 sec.
- When soldering two or more terminals to a common land, use solder resist to separate them.
Flux Cleaning
- Solvent : Fluorine or Alcohol type.
- Cleaning after soldering should be done after the PC board is exposed to room temperature (30℃ or below) for 1 to 2 hours.
- Do not use ultrasonic cleaning.
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
