NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

US-English

×

Toggle switch 8E

●To buy this product, please go to the following Online Web stores.
To the Toggle switch “8E series” page on the DigiKey online shop
To the Toggle switch “8E series” page on the Mouser online shop
To the Toggle switch “8E series” page on the RS components online shop

Locking Lever Toggle Switch

A part of this series was discontinuedCheck affected part number
 
 
FeaturesFeatures
  • 8E Locking Lever Toggle Switch features a locking device to prevent accidental switch operation. Caps are available in 3 colors. Please refer to "Operation Method" on the next page on instructions on how to operate.

  • Contacts : Silver or gold.

  • Terminal style : Solder, Straight, Right angle and vertical mount PC terminals.

  • Epoxy resin case : UL94V-0 self-extinguishing epoxy.

  • Actuator styles : Over 30 actuator variations.

  • Insulation between terminal and ground : 4 mm minimum.

  • Prevention of flux entry The epoxy resin seal on bottom of the switch helps prevent the entry of solder and flux.

  • Insulation barrier : Insulation barrier design between poles helps prevent short-circuiting between poles ensuring high reliability.

  • UL Recognized product File No.E43275

  • CSA Certified product File No.LR38341

Part Number Designation

8E1011C- Z

Series

Actuator shape

E: Lever-lock toggle

No. of poles

1: 1 pole

2: 2 poles

3: 3 poles

4: 4 poles

Switching function

01: ON-ON

02: ON-OFF-ON

06: ON-(ON)

Terminal style

1: Solder

2: PC straight

Contact material / Plating

Blank: 

Bs+Ag or Cu+Ag / Silver plated (Ag)

/ Silver plated (Ag)

C: 

Bs+Ag or Cu+Ag / Gold plated (Ni+Au)

/ Gold plated (Ni+Au)

Bs=Brass, Ag=Silver, Cu=Copper,
Ni=Nickel, Au=Gold

◆Terminals

List of Part Numbers

 

 

 
 
A part number indicated with a gray-back in the list below was discontinued with an order deadline of Dec. 20, 2023.
Part No.No. of polesTerminalsSW functionCAD
Part No.:8E1011-Z 1 pole Solder ON-ON
Part No.:8E1011C-Z 1 pole Solder ON-ON
Part No.:8E1021-Z 1 pole Solder ON-OFF-ON
Part No.:8E1021C-Z 1 pole Solder ON-OFF-ON
Part No.:8E1012-Z 1 pole PC straight ON-ON
Part No.:8E2011-Z 2 poles Solder ON-ON
Part No.:8E2011C-Z 2 poles Solder ON-ON
Part No.:8E2021-Z 2 poles Solder ON-OFF-ON
Part No.:8E2061-Z 2 poles Solder ON-(ON)
Part No.:8E2012C-Z 2 poles PC straight ON-ON
Part No.:8E3011-Z 3 poles Solder ON-ON
Part No.:8E4011-Z 4 poles Solder ON-ON
☆: Semi-standard products / 
★: Made to order products
Optional Accessories
ActuatorPart No.ColorOuntline dimensions
Color Cap 140000470058* Silver
140000470060 Red
140000470059 Black
A silver cap is attached to the switch as standard.

Panel Cut-Out Dimensions

  • With Locking Ring:Panel thickness 1.5 mm Max.
  • Without Locking Ring:Panel thickness 2.5 mm Max.

PC Hole Layouts

Standard Accessories

※A Silver cap is attached to the switch. If a diff erent color (Black or Red) is required, please order separately.

Precautions

Soldering Specifications

  • Manual soldering/Device :Solder iron ①420℃ Max. 3 sec. Max.
  • Auto soldering/275℃ Max. 6 sec. Max.
  • The above-stated soldering conditions shall apply only to switches with straight terminals. Auto soldering is not possible with right-angle terminals. Switches with right-angle terminals should be soldered manually according to the conditions specifi ed in (1) above.
  • When soldering two or more terminals to the common land, use the solder resist to isolate the terminals.。

Flux Cleaning

  • Solvent : Fluorine or Alcohol type.
  • 8A/B/C/D/E/F/J series are not washable. To wash the PC board, clean the soldering surface of the PC board with a brush so that the switch is not exposed to the cleaning solution.
  • Cleaning after soldering should be done after the terminal temperature falls to 90℃ or below, or after leaving the switch for fi ve minutes or longer at room temperature.

Mounting

  • Do not bend the terminals before mounting the switch on the PC board.
  • After mounting the switch, do not place the device in such a way that the device weight will be applied on to the actuator of the switch.
  • For switches with straight terminals, solder the switch on the PC board after fi xing the switch on the panel with a nut.

8 Series Toggles Selection Table

Environmental Data

●The above contents and descriptions are subject to change without notice. 

Products

×

page top