Trimmer potentiometer FT-63
-
●To buy this product, please go to the following Online Web stores.
Low Cost General-Purpose Type
FeaturesFeatures
- RoHS compliant
- Resistance tolerance ±10 %
- “O” ring sealed (Washable)
- Suitable for automatic insertion and automatic adjust ment
- Increase in the level of characteristics in the high frequency field
(In house comparison) - In this series, chemSHERPA downloads are available,
which can be used for REACH-SVHC surveys, etc. - Click to go to the List of Part Numbers below for download
Electrical Characteristics
| Power ratings | 0.5 W (70 °C) 0 W (125 °C) |
|---|---|
| Nominal resistance range | 10 ~ 2 MΩ |
| Resistance tolerance | ± 10 % |
| Resistance law | Linear law (B) |
| Maximum input voltage | DC200 V or power rating, whichever is smaller |
| Maximum wiper current | Power ratings |
| Effective electrical angle | 220 ° (1 turn) |
| End resistance | 1 % or 2 Ω , whichever is greater |
| C.R.V. | 2 % or 3 Ω , whichever is greater |
| Operating temp. range | － 55 ~ 125 °C |
| Temp. coefficient | 10Ω ~ 20Ω : ± 150 10-6/°C maximum 50Ω ~ 2 MΩ : ± 100 10-6/°C maximum |
| Insulation resistance | 1000 MΩ minimum (DC500 V) |
| Dielectric strength | AC900 V, 60 s |
| Net weight | Approx. 0.52 g (FT-63EP, EV) Approx. 0.66 g (FT-63ES, EH, EX, EN) |
Mechanical Characteristics
| Mechanical angle | 260° (1 turn) |
|---|---|
| Operating torque | 20 mN·m {204 gf·cm} maximum |
| Stop strength | 50 mN·m {510 gf·cm} minimum |
| Rotational life | 100 cycles [ Δ R/R ≦ ± (2 Ω +3 %)] |
| Thrust to rotor | 10 N {1.02 kgf} minimum |
| Solderability | 245 ± 3 °C, 2 ~ 3 s |
| Terminal strength | 10 N {1.02 kgf} minimum （Tensile strength） |
Environmental Characteristics
| Test item | Test conditions | Specifications |
|---|---|---|
| Thermal shock | -65~125 °C (0.5 h), 5 cycles | [ΔR/R ≦ 1%] [S.S. ≦ 1%] |
| Humidity | -10~65 °C (Relative humidity 80~98%), 10 cycles, 240 h | [ΔR/R ≦ 2%] |
| Shock | 981 m/s2, 6 ms 6 directions for 3 times each | [ΔR/R ≦ 1%] [S.S. ≦ 1%] |
| Vibration | Amplitude 1.52 mm or Acceleration 196 m/s2, 10~2000 Hz, 3 directions, 12 times each | [ΔR/R ≦ 1%] [S.S. ≦ 1%] |
| Load life | 70 °C, 0.5 W, 1000 h | [ΔR/R ≦ 3 %] [S.S. ≦ 1 %] |
| Low temp. operation | −55 °C, 2 h | [ΔR/R ≦ 2%] [S.S. ≦ 2%] |
| High temp. exposure | 125 °C, 250 h | [ΔR/R ≦ 3%] [S.S. ≦ 2%] |
| Immersion seal | 85 °C, 60 s | No leaks (No continuous bubbles) |
| Soldering heat |
|
[ΔR/R ≦ 1%] |
Δ R/R: Change in total resistance
S.S.: Setting stability
Maximum Input Ratings
| Nominal resistance values(Ω) | Resistance code | Maximum input voltage(V) | Maximum wiper current(mA) |
|---|---|---|---|
| 10※ | 100 | 2.24 | 223 |
| 20※ | 200 | 3.16 | 158 |
| 50 | 500 | 5.00 | 100 |
| 100 | 101 | 7.07 | 70.7 |
| 200 | 201 | 10.0 | 50.0 |
| 300 | 301 | 12.2 | 40.8 |
| 500 | 501 | 15.8 | 31.6 |
| 1k | 102 | 22.4 | 22.4 |
| 2k | 202 | 31.6 | 15.8 |
| 3k | 302 | 38.7 | 12.9 |
| 5k | 502 | 50.0 | 10.0 |
| 10k | 103 | 70.7 | 7.07 |
| 20k | 203 | 100 | 5.00 |
| 30k | 303 | 122 | 4.08 |
| 50k | 503 | 158 | 3.16 |
| 100k | 104 | 200 | 2.00 |
| 200k | 204 | 200 | 1.00 |
| 300k | 304 | 200 | 0.66 |
| 500k | 504 | 200 | 0.40 |
| 1M | 105 | 200 | 0.20 |
| 2M | 205 | 200 | 0.10 |
The products indicated by ※ mark are manufactured upon receipt of order basis
Part Number Designation
| FT-63 | E | T | A | 5 kΩ (502) |
|---|---|---|---|---|
|
Series |
Terminal pins E: Sn (Lead-free) |
Packaging form T: Taping (Ammo pack type) Blank: Bulk in plastic bag |
Adjust position P: Top adjustment S: Side adjustment V: Top adjustment X: Side adjustment H: Side adjustment N: Side adjustment *Classified by pin position |
Resistance value (Resistance code) |
List of Part Numbers
| Nominal resistance values | 10 Ω*, 20 Ω*, 50 Ω, 100 Ω, 200 Ω, 300 Ω, 500 Ω, 1 kΩ, 2 kΩ, 3 kΩ, 5 kΩ, 10 kΩ, 20 kΩ, 30 kΩ, 50 kΩ, 100 kΩ, 200 kΩ, 300 kΩ, 500 kΩ, 1 MΩ, 2 MΩ |
|---|
When ordering, please be sure to include the above nominal resistance value at the end of the part number below. *10 Ω item, 20 Ω item are made to order.
Downloads of chemSHERPA (e.g. for REACH-SVHC surveys) are available below. *Need to log in to download.
| Part No. | Adjustment position | Packaging form | Packaging quantity | REACH-SVHC | CAD |
|---|---|---|---|---|---|
| FT-63ETP | Top adjust | Taping (Ammo pack type) |
1000 pcs./reel | ||
| FT-63ETV | Top adjust | Taping (Ammo pack type) |
1000 pcs./reel | ||
| FT-63ETS | Side adjust | Taping (Ammo pack type) |
1000 pcs./reel | ||
| FT-63ETH | Side adjust | Taping (Ammo pack type) |
1000 pcs./reel | ||
| FT-63EP | Top adjust | Bulk in plastic bag | 100 pcs./pack | ||
| FT-63EV | Top adjust | Bulk in plastic bag | 100 pcs./pack | ||
| FT-63ES | Side adjust | Bulk in plastic bag | 100 pcs./pack | ||
| FT-63EX | Side adjust | Bulk in plastic bag | 100 pcs./pack | ||
| FT-63EH | Side adjust | Bulk in plastic bag | 100 pcs./pack | ||
| FT-63EN | Side adjust | Bulk in plastic bag | 100 pcs./pack |
※
Taping specification is not sold separately and must be purchased in taping unit.
Outline Dimensions
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
