NIDEC COPAL ELECTRONICS logo NIDEC COPAL ELECTRONICS logo

LIST

×

×

Rotary encoders RE30E

●To buy this product, please go to the following Online Web stores.

Power supply voltage is for 5~12V, 24V

  • With temp. compensation circuit
  • With zero index signal
  • Power supply voltage is for 5 ~ 12 V, 24V
  • Economy type
  • RoHS compliant

PART NUMBER DESIGNATION

RE30E-100-213-1

Series name

Resolution (P/R)(P/R)

100, 200, 300,

360, 400,

500, 600, 800,

900, 1000, 1024

Output phase

2:“A” & “B”

Output phase “Z”

1:Provided

Waveform shaping amplifier&Input voltage

3:5 ~ 12 V

4:5 ~ 12 V Open collector
8:24 V

A:24 V Open collector

Output connection

1:Cable wire

LIST OF PART NUMBERS

ResolutionInput voltage
5 ~ 12 V 5 ~ 12 V Open collector 24 V 24 V Open collector
100 (P/R) RE30E-100-213-1 ➡RE30E-100-214-1 ➡RE30E-100-218-1 ➡RE30E-100-21A-1
200 (P/R) RE30E-200-213-1 ➡RE30E-200-214-1 ➡RE30E-200-218-1 ➡RE30E-200-21A-1
300 (P/R) RE30E-300-213-1 ➡RE30E-300-214-1 ➡RE30E-300-218-1 ➡RE30E-300-21A-1
360 (P/R) RE30E-360-213-1 ➡RE30E-360-214-1 ➡RE30E-360-218-1 ➡RE30E-360-21A-1
400 (P/R) RE30E-400-213-1 ➡RE30E-400-214-1 ➡RE30E-400-218-1 ➡RE30E-400-21A-1
500 (P/R) RE30E-500-213-1 ➡RE30E-500-214-1 ➡RE30E-500-218-1 ➡RE30E-500-21A-1
600 (P/R) RE30E-600-213-1 ➡RE30E-600-214-1 ➡RE30E-600-218-1 ➡RE30E-600-21A-1
800 (P/R) RE30E-800-213-1 ➡RE30E-800-214-1 ➡RE30E-800-218-1 ➡RE30E-800-21A-1
900 (P/R) RE30E-900-213-1 ➡RE30E-900-214-1 ➡RE30E-900-218-1 ➡RE30E-900-21A-1
1000 (P/R) RE30E-1000-213-1 ➡RE30E-1000-214-1 ➡RE30E-1000-218-1 ➡RE30E-1000-21A-1
1024 (P/R) RE30E-1024-213-1 ➡RE30E-1024-214-1 ➡RE30E-1024-218-1 ➡RE30E-1024-21A-1

The products indicated by ➡mark are manufactured upon receipt of order basis.

Electrical characteristics

Input voltageDC5 ~ 12 V ± 10 %DC24 V ± 10 %
Input current 50 mA maximum
Output wave form Square wave
Output phases A, B, Z
Resolution (P/R) 100, 200, 300, 360, 400, 500,600, 800, 900, 1000, 1024
Phase difference of outputs A & B 90° ± 45°
Maximum frequencys response 10 kHz (100 P/R), 20 kHz (200P/R),25 kHz (300 ~ 500 P/R), 60 kHz (600 P/R),80 kHz (800 P/R), 90 kHz (900P/R)
Output signal“1 (High)” (Vcc − 1) V min. (Vcc − 2) V min.
“0 (Low)” + 0.5 V max. + 1.0 V max.
Output impedance 2.2 kΩ
Light source LED

Mechanical characteristics

Starting torque 0.29 mN·m {3 gf·cm} maximum
Inertia 2 g·cmmaximum
Shaft loading
(When mounting)
Radial 19.6 N {2 kgf} maximum
Axial 9.81 N {1 kgf} maximum
Net weight Approx. 70 g

Environmental characteristics

Operating temp. range 0 ~ 70 °C
Storage temp. range −20 ~ 80 °C
Protection grade IP40

RELIABILITY TEST

⦿The output wave form shall satisfy the STANDARD SPECIFICATIONS after the following tests.
Test itemTest conditions
VibrationPower OFF Amplitude : 1.52 mm or 98.1 m/s2 (10 G) whichever is smaller.
10 ~ 500 Hz excursion 0.25 h/cycle, 8 cycles each for X, Y, Z, directions.
ShockPower OFF 3 times each in 6 directions (X, Y, Z) at 490 m/s2(50 G), 11 ms.
High temperature
exposure
Power OFF 80 °C  96 h (To be measured after leaving samples for 1 h at normal temperature and humidity after the test.)
Power ON 70 °C 96 h
Low temperature
exposure
Power OFF − 20 °C  96 h
Power ON 0 °C 96 h
HumidityPower OFF 40 °C   Relative humidity 90 〜 95 %   96 h
(To be measured after wiping out moisture and leaving samples for 1 h at normal temperature and humidity after the test.)
Thermal shockPower OFF To be done 10 cycles with the following condition
(To be measured after leaving samples for 1 h at normal temperature and humidity after the test.)
80 °C 1 h、− 20 °C 1 h

OUTLINE DIMENSIONS

Unless otherwise specified, tolerance: ± 0.4 (Unit: mm)

 

ELECTRICAL WIRING

OUTPUT

a, b, c, d = 1/4±T1/8T
ℓ= T±3/4T
The “Z” phase, however, includes no more than two “B” phase startups (CW rotation)

OUTPUT CIRCUIT

⦿5〜12 V type

⦿5〜12 V open collector type

*The above contents and descriptions are subject to change without notice. 

page top