Rotary coded switch SA-7000｜NIDEC COMPONENTS CORPORATION

Rotary coded switch SA-7000

SA-7000

SA-7000

●To buy this product, please go to the following Online Web stores.

Economy type that contributes to cost performance

RoHS compliant
Low profile of 3.0 mm
Wide variety (top or side setting, 10 or 16 positions, J-hook, gull wing or through hole pins) to choose from
Easy to recognize
Low-profile side setting type with support terminals is available

Standard Specifications

Circuit type	BCD (Real code, complementary code) BCH (Real code, complementary code)
Operating temperature range	−40 ~ 85 °C
Storage temperature range	−40 ~ 85 °C
Sealing	Non-Washable
Net weight	Approx. 0.32 g (Top setting type without knob) Approx. 0.34 g (Top setting type with knob) Approx. 0.69 g (Side setting type without knob) Approx. 0.71 g (Side setting type with knob) Approx. 0.42 g (Low-profile side setting type without knob) Approx. 0.44 g (Low-profile side setting type with knob)

Electrical Characteristics

Contact rating	Non-switching:DC50 V 100 mA Switching:DC5 V 100 mA Minimum:DC20 mV 1 μA
Contact resistance	100 mΩ max.
Insulation resistance	100 MΩ (DC100 V) min.
Dielectric strength	AC250 V, 60 s

Mechanical Characteristics

No. of positions	10, 16
Adjustment torque	20 mN·m {204 gf·cm} max.
Stepping angle	36° (10 positions) 22.5° (16 positions)
Solderability	245 ± 3 °C, 2 ~ 3 s
Soldering heat	Reflow：255 °C (Peak temperature) （Please refer to the profile below) Flow：260 ± 3 °C, 5~ 6 s, two Manual soldering：350 ± 10 °C, 3 ~ 4 s
Shear (adhesion)	5 N {0.51 kgf} 10 s
Substrate bending	Width 90 mm, bend 3 mm, 5 s, 1 time
Pull-off strength	5 N {0.51 kgf} 10s
Stop strength (With knob only)	5 N {0.51 kgf} 10s

{ } : Reference only

Environmental Characteristics

Vibration	Amplitude 1.5 mm or Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each
Shock	490 m/s2, 11 ms 6 directions for 3 times each
Load life	10000 steps minimum, DC5 V, 100 mA
Humidity (Steady state)	40 °C, Relative humidity 90 ~ 95 %, 240 h
High temperature exposure	85 °C, 96 h
Low temperature exposure	-40 °C, 96 h
Thermal shock	-40(0.5 h)~85 °C(0.5 h), 5 cycles

Part number designation

SA-7	0	1	0	T	A
Series name	Shape of rotor 0：Without knob (Minus slot) 1：With knob 2：Without knob (Cross slot)	Code format 1：10 positions, real code 3：10 positions, complementary code 5：16 positions, real code 7：16 positions, complementary code	Setting position 0：Top setting 1：Side setting 2：Low-profile side setting & forward support terminal type 3：Low-profile side setting & sideling support terminal type	Form of packaging T：Taping (Reel) Blank：Bulk in plastic bag (Only taping availabe for Low-profile side setting type)	Shape of terminal A：J-hook B：Gull wing C：Through hole pins (Only gull wing availabe for Low-profile side setting type)

SA-7

Series name

Shape of rotor

0：Without knob (Minus slot)
1：With knob
2：Without knob (Cross slot)

Code format

1：10 positions, real code
3：10 positions, complementary code
5：16 positions, real code
7：16 positions, complementary code

Setting position

0：Top setting
1：Side setting
2：Low-profile side setting & forward support terminal type
3：Low-profile side setting & sideling support terminal type

Form of packaging

T：Taping (Reel)
Blank：Bulk in plastic bag
(Only taping availabe for Low-profile side setting type)

Shape of terminal

A：J-hook
B：Gull wing
C：Through hole pins
(Only gull wing availabe for Low-profile side setting type)

List of part numbers

Binary coded decimal Real code

Part number	Shape of terminal	Setting position	Shape of rotor	CAD
SA-7010TA	J-hook	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7010A	J-hook	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7010TB	Gull wing	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7010B	Gull wing	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7010C	Through hole pins	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7110TA	J-hook	Top setting	With knob	3D CAD（Any Model）
SA-7110A	J-hook	Top setting	With knob	3D CAD（Any Model）
SA-7110TB	Gull wing	Top setting	With knob	3D CAD（Any Model）
SA-7110B	Gull wing	Top setting	With knob	3D CAD（Any Model）
SA-7110C	Through hole pins	Top setting	With knob	3D CAD（Any Model）
SA-7210TA	J-hook	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7210A	J-hook	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7210TB	Gull wing	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7210B	Gull wing	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7210C	Through hole pins	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7011TA	J-hook	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7011A	J-hook	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7011TB	Gull wing	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7011B	Gull wing	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7011C	Through hole pins	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7111TA	J-hook	Side setting	With knob	3D CAD（Any Model）
SA-7111A	J-hook	Side setting	With knob	3D CAD（Any Model）
SA-7111TB	Gull wing	Side setting	With knob	3D CAD（Any Model）
SA-7111B	Gull wing	Side setting	With knob	3D CAD（Any Model）
SA-7111C	Through hole pins	Side setting	With knob	3D CAD（Any Model）
SA-7211TA	J-hook	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7211A	J-hook	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7211TB	Gull wing	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7211B	Gull wing	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7211C	Through hole pins	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7012TB	Gull wing	Low-profile side setting & forward support terminal type	Without knob (Minus slot)	3D CAD（Any Model）
SA-7112TB	Gull wing	Low-profile side setting & forward support terminal type	With knob	3D CAD（Any Model）
SA-7212TB	Gull wing	Low-profile side setting & forward support terminal type	Without knob (Cross slot)	3D CAD（Any Model）
SA-7013TB	Gull wing	Low-profile side setting & sideling support terminal type	Without knob (Minus slot)	3D CAD（Any Model）
SA-7113TB	Gull wing Gull wing	Low-profile side setting & sideling support terminal type	With knob	3D CAD（Any Model）
SA-7213TB	Gull wing Gull wing	Low-profile side setting & sideling support terminal type	Without knob (Cross slot)	3D CAD（Any Model）

Binary coded hexadecimal Complementary code

Part number	Shape of terminal	Setting position	Shape of rotor	CAD
SA-7030TA	J-hook	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7030A	J-hook	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7030TB	Gull wing	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7030B	Gull wing	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7030C	Through hole pins	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7130TA	J-hook	Top setting	With knob	3D CAD（Any Model）
SA-7130A	J-hook	Top setting	With knob	3D CAD（Any Model）
SA-7130TB	Gull wing	Top setting	With knob	3D CAD（Any Model）
SA-7130B	Gull wing	Top setting	With knob	3D CAD（Any Model）
SA-7130C	Through hole pins	Top setting	With knob	3D CAD（Any Model）
SA-7230TA	J-hook	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7230A	J-hook	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7230TB	Gull wing	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7230B	Gull wing	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7230C	Through hole pins	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7031TA	J-hook	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7031A	J-hook	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7031TB	Gull wing	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7031B	Gull wing	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7031C	Through hole pins	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7131TA	J-hook	Side setting	With knob	3D CAD（Any Model）
SA-7131A	J-hook	Side setting	With knob	3D CAD（Any Model）
SA-7131TB	Gull wing	Side setting	With knob	3D CAD（Any Model）
SA-7131B	Gull wing	Side setting	With knob	3D CAD（Any Model）
SA-7131C	Through hole pins	Side setting	With knob	3D CAD（Any Model）
SA-7231TA	J-hook	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7231A	J-hook	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7231TB	Gull wing	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7231B	Gull wing	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7231C	Through hole pins	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7032TB	Gull wing	Low-profile side setting & forward support terminal type	Without knob (Minus slot)	3D CAD（Any Model）
SA-7132TB	Gull wing	Low-profile side setting & forward support terminal type	With knob	3D CAD（Any Model）
SA-7232TB	Gull wing	Low-profile side setting & forward support terminal type	Without knob (Cross slot)	3D CAD（Any Model）
SA-7033TB	Gull wing	Low-profile side setting & sideling support terminal type	Without knob (Minus slot)	3D CAD（Any Model）
SA-7133TB	Gull wing	Low-profile side setting & sideling support terminal type	With knob	3D CAD（Any Model）
SA-7233TB	Gull wing	Low-profile side setting & sideling support terminal type	Without knob (Cross slot)	3D CAD（Any Model）

Binary coded hexadecimal Real code

Part number	Shape of terminal	Setting position	Shape of rotor	CAD
SA-7050TA	J-hook	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7050A	J-hook	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7050TB	Gull wing	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7050B	Gull wing	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7050C	Through hole pins	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7150TA	J-hook	Top setting	With knob	3D CAD（Any Model）
SA-7150A	J-hook	Top setting	With knob	3D CAD（Any Model）
SA-7150TB	Gull wing	Top setting	With knob	3D CAD（Any Model）
SA-7150B	Gull wing G	Top setting	With knob	3D CAD（Any Model）
SA-7150C	Through hole pins	Top setting	With knob	3D CAD（Any Model）
SA-7250TA	J-hook	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7250A	J-hook	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7250TB	Gull wing	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7250B	Gull wing	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7250C	Through hole pins	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7051TA	J-hook	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7051A	J-hook	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7051TB	Gull wing	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7051B	Gull wing	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7051C	Through hole pins	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7151TA	J-hook	Side setting	With knob	3D CAD（Any Model）
SA-7151A	J-hook J-	Side setting	With knob	3D CAD（Any Model）
SA-7151TB	Gull wing	Side setting	With knob	3D CAD（Any Model）
SA-7151B	Gull wing	Side setting	With knob	3D CAD（Any Model）
SA-7151C	Through hole pins	Side setting	With knob	3D CAD（Any Model）
SA-7251TA	J-hook	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7251A	J-hook	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7251TB	Gull wing	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7251B	Gull wing	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7251C	Through hole pins	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7052TB	Gull wing	Low-profile side setting & forward support terminal type	Without knob (Minus slot)	3D CAD（Any Model）
SA-7152TB	Gull wing	Low-profile side setting & forward support terminal type	With knob	3D CAD（Any Model）
SA-7252TB	Gull wing	Low-profile side setting & forward support terminal type	Without knob (Cross slot)	3D CAD（Any Model）
SA-7053TB	Gull wing	Low-profile side setting & sideling support terminal type	Without knob (Minus slot)	3D CAD（Any Model）
SA-7153TB	Gull wing	Low-profile side setting & sideling support terminal type	With knob	3D CAD（Any Model）
SA-7253TB	Gull wing	Low-profile side setting & sideling support terminal type	Without knob (Cross slot)	3D CAD（Any Model）

Binary coded hexadecimal Complementary code

Part number	Shape of terminal	Setting position	Shape of rotor	CAD
SA-7070TA	J-hook	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7070A	J-hook	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7070TB	Gull wing	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7070B	Gull wing	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7070C	Through hole pins	Top setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7170TA	J-hook	Top setting	With knob	3D CAD（Any Model）
SA-7170A	J-hook	Top setting	With knob	3D CAD（Any Model）
SA-7170TB	Gull wing	Top setting	With knob	3D CAD（Any Model）
SA-7170B	Gull wing	Top setting	With knob	3D CAD（Any Model）
SA-7170C	Through hole pins	Top setting	With knob	3D CAD（Any Model）
SA-7270TA	J-hook	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7270A	J-hook	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7270TB	Gull wing	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7270B	Gull wing	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7270C	Through hole pins	Top setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7071TA	J-hook	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7071A	J-hook	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7071TB	Gull wing	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7071B	Gull wing	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7071C	Through hole pins	Side setting	Without knob (Minus slot)	3D CAD（Any Model）
SA-7171TA	J-hook	Side setting	With knob	3D CAD（Any Model）
SA-7171A	J-hook	Side setting	With knob	3D CAD（Any Model）
SA-7171TB	Gull wing	Side setting	With knob	3D CAD（Any Model）
SA-7171B	Gull wing	Side setting	With knob	3D CAD（Any Model）
SA-7171C	Through hole pins	Side setting	With knob	3D CAD（Any Model）
SA-7271TA	J-hook	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7271A	J-hook	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7271TB	Gull wing	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7271B	Gull wing	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7271C	Through hole pins	Side setting	Without knob (Cross slot)	3D CAD（Any Model）
SA-7072TB	Gull wing	Low-profile side setting & forward support terminal type	Without knob (Minus slot)	3D CAD（Any Model）
SA-7172TB	Gull wing	Low-profile side setting & forward support terminal type	With knob	3D CAD（Any Model）
SA-7272TB	Gull wing	Low-profile side setting & forward support terminal type	Without knob (Cross slot)	3D CAD（Any Model）
SA-7073TB	Gull wing	Low-profile side setting & sideling support terminal type	Without knob (Minus slot)	3D CAD（Any Model）
SA-7173TB	Gull wing	Low-profile side setting & sideling support terminal type	With knob	3D CAD（Any Model）
SA-7273TB	Gull wing	Low-profile side setting & sideling support terminal type	Without knob (Cross slot)	3D CAD（Any Model）

Code format

No. of positions			16 positions
No. of positions			10 positions
Position			０	1	2	３	4	5	6	7	8	9
Code	Real code	8									●	●
		4					●	●	●	●
		2			●	●			●	●
		1		●		●		●		●		●
	Complementary　code	8	●	●	●	●	●	●	●	●
		4	●	●	●	●					●	●
		２	●	●			●	●			●	●
		1	●		●		●		●		●