NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

Global-En

×

Rotary encoders RE30E

●To buy this product, please go to the following Online Web stores.
To the Rotary encoders  “RE30E series” page on the DigiKey online shop
To the Rotary encoders“RE30E series” page on the RS components online shop
To the Rotary encoders “RE30E series” page on the Chip1stop online shop
To the Rotary encoders “RE30E series” page on the Farnell online shop
To the Rotary encoders “RE30E series” page on the Mouser online shop

Power supply voltage is for 5~12V, 24V

  • With temp. compensation circuit
  • With zero index signal
  • Power supply voltage is for 5 ~ 12 V, 24V
  • Economy type
  • RoHS compliant

PART NUMBER DESIGNATION

RE30E-100-213-1

Series name

Resolution (P/R)(P/R)

100, 200, 300,

360, 400,

500, 600, 800,

900, 1000, 1024

Output phase

2:“A” & “B”

Output phase “Z”

1:Provided

Waveform shaping amplifier&Input voltage

3:5 ~ 12 V

4:5 ~ 12 V Open collector
8:24 V

A:24 V Open collector

Output connection

1:Cable wire

LIST OF PART NUMBERS

ResolutionInput voltage
5 ~ 12 V 5 ~ 12 V Open collector 24 V 24 V Open collector
100 (P/R) RE30E-100-213-1 ➡RE30E-100-214-1 ➡RE30E-100-218-1 ➡RE30E-100-21A-1
200 (P/R) RE30E-200-213-1 ➡RE30E-200-214-1 ➡RE30E-200-218-1 ➡RE30E-200-21A-1
300 (P/R) RE30E-300-213-1 ➡RE30E-300-214-1 ➡RE30E-300-218-1 ➡RE30E-300-21A-1
360 (P/R) RE30E-360-213-1 ➡RE30E-360-214-1 ➡RE30E-360-218-1 ➡RE30E-360-21A-1
400 (P/R) RE30E-400-213-1 ➡RE30E-400-214-1 ➡RE30E-400-218-1 ➡RE30E-400-21A-1
500 (P/R) RE30E-500-213-1 ➡RE30E-500-214-1 ➡RE30E-500-218-1 ➡RE30E-500-21A-1
600 (P/R) RE30E-600-213-1 ➡RE30E-600-214-1 ➡RE30E-600-218-1 ➡RE30E-600-21A-1
800 (P/R) RE30E-800-213-1 ➡RE30E-800-214-1 ➡RE30E-800-218-1 ➡RE30E-800-21A-1
900 (P/R) RE30E-900-213-1 ➡RE30E-900-214-1 ➡RE30E-900-218-1 ➡RE30E-900-21A-1
1000 (P/R) RE30E-1000-213-1 ➡RE30E-1000-214-1 ➡RE30E-1000-218-1 ➡RE30E-1000-21A-1
1024 (P/R) RE30E-1024-213-1 ➡RE30E-1024-214-1 ➡RE30E-1024-218-1 ➡RE30E-1024-21A-1

The products indicated by ➡mark are manufactured upon receipt of order basis.

Electrical characteristics

Input voltageDC5 ~ 12 V ± 10 %DC24 V ± 10 %
Input current 50 mA maximum
Output wave form Square wave
Output phases A, B, Z
Resolution (P/R) 100, 200, 300, 360, 400, 500,600, 800, 900, 1000, 1024
Phase difference of outputs A & B 90° ± 45°
Maximum frequencys response 10 kHz (100 P/R), 20 kHz (200P/R),25 kHz (300 ~ 500 P/R), 60 kHz (600 P/R),80 kHz (800 P/R), 90 kHz (900P/R)
Output signal“1 (High)” (Vcc − 1) V min. (Vcc − 2) V min.
“0 (Low)” + 0.5 V max. + 1.0 V max.
Output impedance 2.2 kΩ
Light source LED

Mechanical characteristics

Starting torque 0.29 mN·m {3 gf·cm} maximum
Inertia 2 g·cmmaximum
Shaft loading
(When mounting)
Radial 19.6 N {2 kgf} maximum
Axial 9.81 N {1 kgf} maximum
Net weight Approx. 70 g

Environmental characteristics

Operating temp. range 0 ~ 70 °C
Storage temp. range −20 ~ 80 °C
Protection grade IP40

RELIABILITY TEST

⦿The output wave form shall satisfy the STANDARD SPECIFICATIONS after the following tests.
Test itemTest conditions
VibrationPower OFF Amplitude : 1.52 mm or 98.1 m/s2 (10 G) whichever is smaller.
10 ~ 500 Hz excursion 0.25 h/cycle, 8 cycles each for X, Y, Z, directions.
ShockPower OFF 3 times each in 6 directions (X, Y, Z) at 490 m/s2(50 G), 11 ms.
High temperature
exposure
Power OFF 80 °C  96 h (To be measured after leaving samples for 1 h at normal temperature and humidity after the test.)
Power ON 70 °C 96 h
Low temperature
exposure
Power OFF − 20 °C  96 h
Power ON 0 °C 96 h
HumidityPower OFF 40 °C   Relative humidity 90 〜 95 %   96 h
(To be measured after wiping out moisture and leaving samples for 1 h at normal temperature and humidity after the test.)
Thermal shockPower OFF To be done 10 cycles with the following condition
(To be measured after leaving samples for 1 h at normal temperature and humidity after the test.)
80 °C 1 h、− 20 °C 1 h

OUTLINE DIMENSIONS

Unless otherwise specified, tolerance: ± 0.4 (Unit: mm)

 

ELECTRICAL WIRING

OUTPUT

a, b, c, d = 1/4±T1/8T
ℓ= T±3/4T
The “Z” phase, however, includes no more than two “B” phase startups (CW rotation)

OUTPUT CIRCUIT

⦿5〜12 V type

⦿5〜12 V open collector type

●The above contents and descriptions are subject to change without notice. 

Products

×

page top