NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

Liste

×

×


Produkte

Verteiler

EU-Deutsch

×

Pushbutton switch DP4&DPL4

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal  Überprüfen Sie die Verteiler.
VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.
Gehen Sie zum chip1stop Online-Shop.

Non-Illuminated Type

A part of this series was discontinuedCheck affected part number
 
 
FeaturesFeatures
  • Flexible Circuit Configuration The switch incorporates two 2-circuit switches which provide flexible circuit configuration.

  • High Contact Reliability Gold-plated contact with self-cleaning, twin contact mechanism provides high contact reliability.

  • PC Board Mount Direct mounting to PC board. The terminal pin layout is in inch pitch.

  • Ideal For Use in Dry Circuit (Gold-Plated Contact) When a switch is used under bad environmental conditions (sulfidizing gas, etc.), contact surface may be affected. Gold-plated contact is recommended especially for low current applications.

Specification

Rating Non-Switching:DC50V 100mA
Switching:100mA 5VDC(Gold DC0.2mV 1μA min.)
Initial Contact Resistance

100mΩ max. (1.5mA 200μVAC)

Dielectric Strength

250VAC 1 minute

Insulation Resistance

1,000MΩ min. (DC250V)

Electrical Life 200,000 operations
Travel

2.5mm

Operating Force

2.45±0.98N

Operating Temperature Range -25~+75℃
Storage Temperature Range -25~+85℃
Contact Bounce 5 ms max.

Part Number Designation

DPL4 -200B- Z

Series

Actuator type

Blank: 

Momentary

L: 

Push to lock

Structure

Registration No.

Contact plating

Blank: 

Silver plated

B: 

Gold plated

 

List of Part Numbers

 

 

 
 
A part number indicated with a gray-back in the list below was discontinued with an order deadline of Dec. 20, 2023.
Part No.Contact platingSW functionNo. of polesSW functionCAD
Part No.:DP4-200-Z Silver plated Momentary 2 poles ON-(ON)
Part No.:DP4-200B-Z Gold plated Momentary 2 poles ON-(ON)
Part No.:DPL4-200-Z Silver plated Push to lock 2 poles ON-ON
★: Made to order products
Optional Accessories
Part numbers indicated with a gray-back in the list below were discontinued with an order deadline of Dec. 20, 2023.
AccessoriesPart No.ColorOuline dimensions
Color button 140008050103 White
140008050104 Black
140008050105 Red
140008050109 Gray
Bracket 140000340156 White
140000340157 Black
140000340158 Red
140000340162 Gray

Soldering

  • Manual soldering
    Device: Soldering iron   
    380°C, Max. 3 s Max.
  • Auto soldering
    Device: Jet wave or dip type   
    275±10℃ 6 s Max. ・Preheat time shall be 120 s max. at 80~120 ℃.
    ・ For DPL type, soldering should be done with the lock released.

PC Hole Layouts

※Do not remove the button when the switch is locked.

Optional Accessories

Environmental Data

●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.

Produkte

×

page top