Rotary coded switch S-1000A/2000A｜NIDEC COMPONENTS EUROPE GmbH

Rotary coded switch S-1000A/2000A

S-1000A/2000A

S-1000A/2000A

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

Pin compatible with conventional DIP switches

RoHS compliant
Protection against dust and whole cleaning after soldering is possible
Pin compatible with conventional DIP switches
Translucent knob with flange type (S-1200A/2200A series)
Distinguished visibility with translucent flange
Settable with fingers or screwdriver

Standard Specifications

Circuit type	BCD (Real code, complementary code) BCH (Real code, complementary code)
Operating temperature range	−40 ~ 85 °C
Storage temperature range	−40 ~ 85 °C
Sealing	Washable by “O” ring
Net weight	Approx. 0.87 g (S-1010A, S-1030A, S-2010A, S-2030A) Approx. 1.13 g (S-1011A, S-1031A, S-2011A, S-2031A) Approx. 0.97 g (S-1110A, S-1130A, S-2110A, S-2130A) Approx. 1.23 g (S-1111A, S-1131A, S-2111A, S-2131A)) Approx. 1.02 g (S-1210A, S-1230A, S-2210A, S-2230A))) Approx. 1.28 g (S-1211A, S-1231A, S-2211A, S-2231A)

Electrical Characteristics

Contact rating	Non-switching:DC50 V 100 mA Switching:DC5 V 100 mA Minimum:DC20 mV 1 μA
Contact resistance	100 mΩ maximum
Insulation resistance	1000 MΩ (DC100 V) minimum
Dielectric strength	AC300 V, 60 s

Mechanical Characteristics

No. of positions	16 (S-1000A), 10 (S-2000A)
Adjustment torque	13 mN·m {133 gf·cm} min.
Stepping angle	22.5° (S-1000A), 36° (S-2000A)
Terminal strength	15 N {1.53 kgf} min.
Solderability	245 ± 3 °C, 2 ~ 3 s
Soldering heat	Flow : 260 ± 3 °C as the temperature in a pot of molten solder, immer sion from head of terminal to backside of board, 5 ~ 6 s, two times maximum Manual soldering： 380 ± 10 °C, 3 ~ 4 s

Environmental Characteristics

Vibration	Amplitude 1.5 mm or Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each
Shock	490 m/s2, 11 ms 6 directions for 3 times each
Load life	10000 steps DC5 V, 100 mA
Humidity (Steady state)	Resistance load DC50V 100mA 60 °C, Relative humidity 90 ~ 95 %, 1000 h
High temperature exposure	85 °C, 1000 h
Low temperature exposure	−40 °C, 96 h
Thermal shock	−40(0.5 h) ~ 85 °C(0.5 h), 5 cycles

Part number designation

S -	１	０	１	０	A	W
Series name	No. of positions 1：16 positions 2：10 positions	Shape of rotor 0：Without knob 1：With knob (with extended shaft) 2：Translucent knob with flange (Black housing)	Code format 1：Real code 3：Complementary code	Setting position 0：Top setting 1：Side setting		Form of packaging W：Tray packaging Blank：Bulk in plastic bag

S -

１

０

１

０

Series name

No. of positions

1：16 positions

2：10 positions

Shape of rotor

0：Without knob

1：With knob (with extended shaft)

2：Translucent knob with flange (Black housing)

Code format

1：Real code

3：Complementary code

Setting position

0：Top setting

1：Side setting

Form of packaging

W：Tray packaging
Blank：Bulk in plastic bag

List of part numbers

Part number	Code format	Setting position	Shape of rotor	Pieces in package	CAD
S-2010AW	BCD Real code	Top setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-2010A	BCD Real code	Top setting	Without knob	25 pcs./pack	3D CAD（Any Model）
S-2110AW	BCD Real code	Top setting	With knob (with extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-2110A	BCD Real code	Top setting	With knob (with extended shaft)	25 pcs./pack	3D CAD（Any Model）
S-2210AW	BCD Real code	Top setting	Translucent knob with flange	50 pcs./tray	3D CAD（Any Model）
S-2210A	BCD Real code	Top setting	Translucent knob with flange	25 pcs./pack	3D CAD（Any Model）
S-2011AW	BCD Real code	Side setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-2011A	BCD Real code	Side setting	Without knob	25 pcs./pack	3D CAD（Any Model）
S-2111AW	BCD Real code	Side setting	With knob (with extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-2111A	BCD Real code	Side setting	With knob (with extended shaft)	25 pcs./pack	3D CAD（Any Model）
S-2211AW	BCD Real code	Side setting	Translucent knob with flange	50 pcs./tray	3D CAD（Any Model）
S-2211A	BCD Real code	Side setting	Translucent knob with flange	25 pcs./pack	3D CAD（Any Model）
S-2030AW	BCD Real code	Top setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-2030A	BCD Real code	Top setting	Without knob	25 pcs./pack	3D CAD（Any Model）
S-2110AW	BCD Real code	Top setting	With knob (with extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-2110A	BCD Real code	Top setting	With knob (with extended shaft)	25 pcs./pack	3D CAD（Any Model）
S-2210AW	BCD Real code	Top setting	Translucent knob with flange	50 pcs./tray	3D CAD（Any Model）
S-2210A	BCD Real code	Top setting	Translucent knob with flange	25 pcs./pack	3D CAD（Any Model）
S-2030AW	BCD Complementary code	Side setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-2210A	BCD Complementary code	Side setting	Without knob	25 pcs./pack	3D CAD（Any Model）
S-2130AW	BCD Complementary code	Side setting	With knob (with extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-2130A	BCD Complementary code	Side setting	With knob (with extended shaft)	25 pcs./pack	3D CAD（Any Model）
S-2230AW	BCD Complementary code	Side setting	Translucent knob with flange	50 pcs./tray	3D CAD（Any Model）
S-2230A	BCD Complementary code	Side setting	Translucent knob with flange	25 pcs./pack	3D CAD（Any Model）
S-2031AW	BCD Complementary code	Side setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-2031A	BCD Complementary code	Side setting	Without knob	25 pcs./pack	3D CAD（Any Model）
S-2131AW	BCD Complementary code	Side setting	With knob (with extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-2131A	BCD Complementary code	Side setting	With knob (with extended shaft)	25 pcs./pack	3D CAD（Any Model）
S-2231AW	BCD Complementary code	Side setting	Translucent knob with flange	50 pcs./tray	3D CAD（Any Model）
S-2231A	BCD Complementary code	Side setting	Translucent knob with flange	25 pcs./pack	3D CAD（Any Model）
S-1010AW	BCH，Real code	Top setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-1010A	BCH，Real code	Top setting	Without knob	25 pcs./pack	3D CAD（Any Model）
S-1110AW	BCH，Real code	Top setting	With knob (with extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-1110A	BCH，Real code	Top setting	With knob (with extended shaft)	25 pcs./pack	3D CAD（Any Model）
S-1210AW	BCH，Real code	Top setting	Translucent knob with flange	50 pcs./tray	3D CAD（Any Model）
S-1210A	BCH，Real code	Top setting	Translucent knob with flange	25 pcs./pack	3D CAD（Any Model）
S-1011AW	BCH，Real code	Side setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-1011A	BCH，Real code	Side setting	Without knob	25 pcs./pack	3D CAD（Any Model）
S-1111AW	BCH，Real code	Side setting	With knob (with extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-1111A	BCH，Real code	Side setting	With knob (with extended shaft)	25 pcs./pack	3D CAD（Any Model）
S-1211AW	BCH，Real code	Side setting	Translucent knob with flange	50 pcs./tray	3D CAD（Any Model）
S-1211A	BCH，Real code	Side setting	Translucent knob with flange	25 pcs./pack	3D CAD（Any Model）
S-1030AW	BCH，Complementary code	Top setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-1030A	BCH，Complementary code	Top setting	Without knob	25 pcs./pack	3D CAD（Any Model）
S-1110AW	BCH，Complementary code	Top setting	With knob (with extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-1110A	BCH，Complementary code	Top setting	With knob (with extended shaft)	25 pcs./pack	3D CAD（Any Model）
S-1210AW	BCH，Complementary code	Top setting	Translucent knob with flange	50 pcs./tray	3D CAD（Any Model）
S-1210A	BCH，Complementary code	Top setting	Translucent knob with flange	25 pcs./pack	3D CAD（Any Model）
S-1030AW	BCH，Complementary code	Side setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-1030A	BCH，Complementary code	Side setting	Without knob	25 pcs./pack	3D CAD（Any Model）
S-1130AW	BCH，Complementary code	Side setting	With knob (with extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-1130A	BCH，Complementary code	Side setting	With knob (with extended shaft)	25 pcs./pack	3D CAD（Any Model）
S-1230AW	BCH，Complementary code	Side setting	Translucent knob with flange	50 pcs./tray	3D CAD（Any Model）
S-1230A	BCH，Complementary code	Side setting	Translucent knob with flange	25 pcs./pack	3D CAD（Any Model）
S-1031AW	BCH，Complementary code	Side setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-1031A	BCH，Complementary code	Side setting	Without knob	25 pcs./pack	3D CAD（Any Model）
S-1131AW	BCH，Complementary code	Side setting	With knob (with extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-1131A	BCH，Complementary code	Side setting	With knob (with extended shaft)	25 pcs./pack	3D CAD（Any Model）
S-1231AW	BCH，Complementary code	Side setting	Translucent knob with flange	50 pcs./tray	3D CAD（Any Model）
S-1231A	BCH，Complementary code	Side setting	Translucent knob with flange	25 pcs./pack	3D CAD（Any Model）