Rotary coded switch SH-7000｜NIDEC COMPONENTS EUROPE GmbH

Rotary coded switch SH-7000

SH-7000

SH-7000

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

Terminal layout variation UP

RoHS compliant
Center Common terminal pins location
High digit visibility
Gray code output available
Washable

Standard Specifications

Circuit type	BCD(Real code, Complementary code, Gray code) BCH(Real code, Complementary code, Gray code)
Operating temperature range	− 40 ~ 85 °C,− 40 ~ 105 °C (Gray code)
Storage temperature range	− 40 ~ 85 °C,− 40 ~ 105 °C (Gray code)
Sealing	Washable by “O” ring
Net weight	Approx. 0.38 g

Electrical Characteristics

Contact rating	Non-switching:DC50 V 100 mA Switching:DC5 V 100 mA Minimum:DC20 mV 1 μA
Contact resistance	100 mΩ maximum
Insulation resistance	1000 MΩ (DC100 V) minimum
Dielectric strength	AC250 V, 60 s

Mechanical Characteristics

No. of positions	10, 16
Adjustment torque	3 ~ 20 mN·m { 3~ 204 gf·cm} maximum
Stepping angle	36° (10 positions)
Solderability	245 ± 3 °C, 2 ~ 3 s
Soldering heat	Flow : 260 ± 3 °C as the temperature in a pot of molten solder, immer sion from head of ter minal to backside of board,5 ~ 6 s, two times maximum Reflow : Peak temperature 255 °C Manual soldering： 350 ± 10 °C, 3 ~ 4 s
Shear (adhesion)	5 N {0.51 kgf} 10 s
Substrate bending	Width 90 mm, bend 3 mm, 5 s, 1 time
Pull-off strength	5 N {0.51 kgf} 10s

Environmental Characteristics

Vibration	Amplitude 1.5 mm or Acceleration 98 m/s ,10-500-10 Hz, 3 directions for 2 h each
Shock	490 m/s2, 11 ms 6 directions for 3 times each
Load life	10000 steps minimum, DC5 V, 100 mA
Humidity	40 °C, Relative humidity 90 ~ 95 %,240 h
High temperature exposure	85 °C, 96 h
Low temperature exposure	− 40 °C, 96 h
Thermal shock	− 40 (0.5 h) ~ 85 °C ( 0.5 h ), 5 cycles − 40 (0.5 h) ~ 105 °C ( 0.5 h ), 5 cycles (Gray code)

Part number designation

SH-7	0	1	0	T	A
Series name	Shape of rotor 00：Without knob (Minus slot)	Code format 1：10 positions, real code 3：10 positions, complementary code 4：10 positions, gray code 5：16 positions, real code 7：16 positions, complementary code 8：16 positions, gray code	Setting position 0：Top setting	Form of packaging T：Taping (Reel) M：Magazine	Shape of terminal A：J-hook B：Gull wing C：Through hole pins

SH-7

Series name

Shape of rotor

00：Without knob (Minus slot)

Code format

1：10 positions, real code

3：10 positions, complementary code

4：10 positions, gray code

5：16 positions, real code

7：16 positions, complementary code

8：16 positions, gray code

Setting position

0：Top setting

Form of packaging

T：Taping (Reel)

M：Magazine

Shape of terminal

A：J-hook

B：Gull wing

C：Through hole pins

List of part numbers

Part number	Code format	Setting position	Shape of rotor	Shape of terminal	Form of packaging	CAD
SH-7010TA	10 positions, real code	Top setting	Without knob (Minus slot)	J-hook	500 pcs./reel	3D CAD（Any Model）
SH-7010MA	10 positions, real code	Top setting	Without knob (Minus slot)	J-hook	50 pcs./stick	3D CAD（Any Model）
SH-7010TB	10 positions, real code	Top setting	Without knob (Minus slot)	Gull wing	500 pcs./reel	3D CAD（Any Model）
SH-7010MB	10 positions, real code	Top setting	Without knob (Minus slot)	Gull wing	50 pcs./stick	3D CAD（Any Model）
SH-7010MC	10 positions, real code	Top setting	Without knob (Minus slot)	Through hole pins	50 pcs./stick	3D CAD（Any Model）
SH-7030TA	10 positions, complementary code	Top setting	Without knob (Minus slot)	J-hook	500 pcs./reel	3D CAD（Any Model）
SH-7030MA	10 positions, complementary code	Top setting	Without knob (Minus slot)	J-hook	50 pcs./stick	3D CAD（Any Model）
SH-7030TB	10 positions, complementary code	Top setting	Without knob (Minus slot)	Gull wing	500 pcs./reel	3D CAD（Any Model）
SH-7030MB	10 positions, complementary code	Top setting	Without knob (Minus slot)	Gull wing	50 pcs./stick	3D CAD（Any Model）
SH-7030MC	10 positions, complementary code	Top setting	Without knob (Minus slot)	Through hole pins	50 pcs./stick	3D CAD（Any Model）
SH-7040TB	10 positions, gray code	Top setting	Without knob (Minus slot)	Gull wing	500 pcs./reel	3D CAD（Any Model）
SH-7040MB	10 positions, gray code	Top setting	Without knob (Minus slot)	Gull wing	50 pcs./stick	3D CAD（Any Model）
SH-7050TA	16 positions, real code	Top setting	Without knob (Minus slot)	J-hook	500 pcs./reel	3D CAD（Any Model）
SH-7050MA	16 positions, real code	Top setting	Without knob (Minus slot)	J-hook	50 pcs./stick	3D CAD（Any Model）
SH-7050TB	16 positions, real code	Top setting	Without knob (Minus slot)	Gull wing	500 pcs./reel	3D CAD（Any Model）
SH-7050MB	16 positions, real code	Top setting	Without knob (Minus slot)	Gull wing	50 pcs./stick	3D CAD（Any Model）
SH-7050MC	16 positions, real code	Top setting	Without knob (Minus slot)	Through hole pins	50 pcs./stick	3D CAD（Any Model）
SH-7070TA	16 positions, complementary code	Top setting	Without knob (Minus slot)	J-hook	500 pcs./reel	3D CAD（Any Model）
SH-7070MA	16 positions, complementary code	Top setting	Without knob (Minus slot)	J-hook	50 pcs./stick	3D CAD（Any Model）
SH-7070TB	16 positions, complementary code	Top setting	Without knob (Minus slot)	Gull wing	500 pcs./reel	3D CAD（Any Model）
SH-7070MB	16 positions, complementary code	Top setting	Without knob (Minus slot)	Gull wing	50 pcs./stick	3D CAD（Any Model）
SH-7070MC	16 positions, complementary code	Top setting	Without knob (Minus slot)	Through hole pins	50 pcs./stick	3D CAD（Any Model）
SH-7080TB	16 positions, gray code	Top setting	Without knob (Minus slot)	Gull wing	500 pcs./reel	3D CAD（Any Model）
SH-7080MB	16 positions, gray code	Top setting	Without knob (Minus slot)	Gull wing	50 pcs./stick	3D CAD（Any Model）