Rotary coded switch S-7000｜NIDEC COMPONENTS EUROPE GmbH

Rotary coded switch S-7000

S-7000

S-7000

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

Surface Mount Dip Rotary coded switch

RoHS compliant
Low profile of 2.9 mm
Wide variety (top or side setting, 6, 10 or 16 positions, J-hook, gull wing or throuhg hole pins) to choose from
Compatible with flow (top setting only) / reflow soldering
Washable

Standard specifications

Circuit type	BCD (Real code, complementary code) BCH (Real code, complementary code)
Operating temperature range	−40 ~ 85 °C
Storage temperature range	−40 ~ 85 °C
Sealing	Washable by “O” ring
Net weight	Approx. 0.26 g (A or B type in top setting) Approx. 0.28 g (C type in top setting) Approx. 0.62 g (Side setting type)

Electrical characteristics

Contact rating	Non-switching:DC50 V 100 mA Switching:DC5 V 100 mA Minimum:DC20 mV 1 μA
Contact resistance	100 mΩ maximum
Insulation resistance	100 MΩ (DC100 V) minimum
Dielectric strength	AC250 V, 60 s

Mechanical characteristics

No. of positions	6, 10, 16
Adjustment torque	20 mN·m {204 gf·cm} maximum
Stepping angle	60° (6 positions) 36° (10 positions) 22.5° (16 positions)
Solderability	245 ± 3 °C, 2 ~ 3 s
Soldering heat	Reflow：255 °C(Peak temperature) Flow : 260 ± 3 °C, 5 ~ 6 s, two times maximum Manual soldering : 350 ± 10 °C, 3 ~ 4 s
Substrate bending	Width 90 mm, bend 3 mm, 5 s, 1 time
Shear (adhesion)	5 N {0.51 kgf}, 10 s
Pull-off strength	5 N {0.51 kgf}, 10 s

{ } : Reference only

〈Reflow profile for soldering heat evaluation〉

Environmental characteristics

Vibration	Amplitude 1.5 mm or　Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each
Shock	490 m/s , 11 ms、6 directions for 3 times each
Load life	10000 steps minimum, DC5 V, 100 mA
Humidity (Steady state)	40 °C, Relative humidity 90 ~ 95 %, 240 h
High temperature exposure	85 °C, 96 h
Low temperature exposure	− 40 °C, 96 h
Thermal shock	− 40 (0.5 h) ~ 85 °C ( 0.5 h ), 5 cycles

Part number designation

S-7	0	1	0	E	T	A
Series name	Shape of rotor　 0:Without knob	Code format 1：10 positions, real code 3：10 positions, complementary code 6： 6 positions, real code 5：16 positions, real code 7：16 positions, complementary code	Setting position 0：Top setting 1：Side setting （Except for 6 positions type）	Terminal pin E：Au (Lead-free)	Form of packaging T：Taping (Reel) W：Tray packaging (Through hole pins only) Blank：Bulk in plastic bag	Shape of terminal A：J-hook B：Gull wing C：Through hole pins （Except for 6 positions type）

S-7

Series name

Shape of rotor　

0:Without knob

Code format

1：10 positions, real code
3：10 positions, complementary code
6： 6 positions, real code
5：16 positions, real code
7：16 positions, complementary code

Setting position

0：Top setting
1：Side setting
（Except for 6 positions type）

Terminal pin

E：Au (Lead-free)

Form of packaging

T：Taping (Reel)
W：Tray packaging (Through hole pins only)
Blank：Bulk in plastic bag

Shape of terminal

A：J-hook
B：Gull wing
C：Through hole pins
（Except for 6 positions type）

List of part numbers

Part number	Setting position	Shape of terminal	Code format	Pieces in package	CAD
S-7060ETA	Top setting	J-hook	Binary coded hexal Real code	500 pcs. / reel	3D CAD（Any Model）
S-7060EA	Top setting	J-hook	Binary coded hexal Real code	50 pcs. / pack	3D CAD（Any Model）
S-7060ETB	Top setting	Gull wing	Binary coded hexal Real code	500 pcs. / reel	3D CAD（Any Model）
S-7060EB	Top setting	Gull wing	Binary coded hexal Real code	50 pcs. / pack	3D CAD（Any Model）
S-7010ETA	Top setting	J-hook	Binary coded decimal Real code	500 pcs. / reel	3D CAD（Any Model）
S-7010EA	Top setting	J-hook	Binary coded decimal Real code	50 pcs. / pack	3D CAD（Any Model）
S-7010ETB	Top setting	Gull wing	Binary coded decimal Real code	500 pcs. / reel	3D CAD（Any Model）
S-7010EB	Top setting	Gull wing	Binary coded decimal Real code	50 pcs. / pack	3D CAD（Any Model）
S-7010EWC	Top setting	Through hole pin	Binary coded decimal Real code	50 pcs. / tray	3D CAD（Any Model）
S-7010EC	Top setting	Through hole pin	Binary coded decimal Real code	50 pcs. / pack	3D CAD（Any Model）
⇛S-7011ETA	Side setting	J-hook	Binary coded decimal Real code	500 pcs. / reel	3D CAD（Any Model）
⇛S-7011EA	Side setting	J-hook	Binary coded decimal Real code	50 pcs. / pack	3D CAD（Any Model）
⇛S-7011ETB	Side setting	Gull wing	Binary coded decimal Real code	500 pcs. / reel	3D CAD（Any Model）
⇛S-7011EB	Side setting	Gull wing	Binary coded decimal Real code	50 pcs. / pack	3D CAD（Any Model）
⇛S-7011EWC	Side setting	Through hole pin	Binary coded decimal Real code	50 pcs. / tray	3D CAD（Any Model）
⇛ S-7011EC	Side setting	Through hole pin	Binary coded decimal Real code	50 pcs. / pack	3D CAD（Any Model）
S-7030ETA	Top setting	J-hook	Binary coded decimal Complementary code	500 pcs. / reel	3D CAD（Any Model）
S-7030EA	Top setting	J-hook	Binary coded decimal Complementary code	50 pcs. / pack	3D CAD（Any Model）
S-7030ETB	Top setting	Gull wing	Binary coded decimal Complementary code	500 pcs. / reel	3D CAD（Any Model）
S-7030EB	Top setting	Gull wing	Binary coded decimal Complementary code	50 pcs. / pack	3D CAD（Any Model）
S-7030EWC	Top setting	Through hole pin	Binary coded decimal Complementary code	50 pcs. / tray	3D CAD（Any Model）
S-7030EC	Top setting	Through hole pin	Binary coded decimal Complementary code	50 pcs. / pack	3D CAD（Any Model）
⇛S-7031ETA	Side setting	J-hook	Binary coded decimal Complementary code	500 pcs. / reel	3D CAD（Any Model）
⇛S-7031EA	Side setting	J-hook	Binary coded decimal Complementary code	50 pcs. / pack	3D CAD（Any Model）
⇛S-7031ETB	Side setting	Gull wing	Binary coded decimal Complementary code	500 pcs. / reel	3D CAD（Any Model）
⇛S-7031EB	Side setting	Gull wing	Binary coded decimal Complementary code	50 pcs. / pack	3D CAD（Any Model）
⇛S-7031EWC	Side setting	Through hole pin	Binary coded decimal Complementary code	50 pcs. / tray	3D CAD（Any Model）
⇛ S-7031EC	Side setting	Through hole pin	Binary coded decimal Complementary code	50 pcs. / pack	3D CAD（Any Model）
S-7050ETA	Top setting	J-hook	Binary coded hexal Real code	500 pcs. / reel	3D CAD（Any Model）
S-7050EA	Top setting	J-hook	Binary coded hexal Real code	50 pcs. / pack	3D CAD（Any Model）
S-7050ETB	Top setting	Gull wing	Binary coded hexal Real code	500 pcs. / reel	3D CAD（Any Model）
S-7050EB	Top setting	Gull wing	Binary coded hexal Real code	50 pcs. / pack	3D CAD（Any Model）
S-7050EWC	Top setting	Through hole pin	Binary coded hexal Real code	50 pcs. / tray	3D CAD（Any Model）
S-7050EC	Top setting	Through hole pin	Binary coded hexal Real code	50 pcs. / pack	3D CAD（Any Model）
⇛S-7051ETA	Side setting	J-hook	Binary coded hexal Real code	500 pcs. / reel	3D CAD（Any Model）
⇛S-7051EA	Side setting	J-hook	Binary coded hexal Real code	50 pcs. / pack	3D CAD（Any Model）
⇛S-7051ETB	Side setting	Gull wing	Binary coded hexal Real code	500 pcs. / reel	3D CAD（Any Model）
⇛S-7051EB	Side setting	Gull wing	Binary coded hexal Real code	50 pcs. / pack	3D CAD（Any Model）
⇛S-7051EWC	Side setting	Through hole pin	Binary coded hexal Real code	50 pcs. / tray	3D CAD（Any Model）
⇛S-7051EC	Side setting	Through hole pin	Binary coded hexal Real code	50 pcs. / pack	3D CAD（Any Model）
S-7070ETA	Top setting	J-hook	Binary coded hexadecimal Complementary code	500 pcs. / reel	3D CAD（Any Model）
S-7070EA	Top setting	J-hook	Binary coded hexadecimal Complementary code	50 pcs. / pack	3D CAD（Any Model）
S-7070ETB	Top setting	Gull wing	Binary coded hexadecimal Complementary code	500 pcs. / reel	3D CAD（Any Model）
S-7070EB	Top setting	Gull wing	Binary coded hexadecimal Complementary code	50 pcs. / pack	3D CAD（Any Model）
S-7070EWC	Top setting	Through hole pin	Binary coded hexadecimal Complementary code	50 pcs. / tray	3D CAD（Any Model）
S-7070EC	Top setting	Through hole pin	Binary coded hexadecimal Complementary code	50 pcs. / pack	3D CAD（Any Model）
⇛S-7071ETA	Side setting	J-hook	Binary coded hexadecimal Complementary code	500 pcs. / reel	3D CAD（Any Model）
⇛S-7071EA	Side setting	J-hook	Binary coded hexadecimal Complementary code	50 pcs. / pack	3D CAD（Any Model）
⇛S-7071ETB	Side setting	Gull wing	Binary coded hexadecimal Complementary code	500 pcs. / reel	3D CAD（Any Model）
⇛S-7071EB	Side setting	Gull wing	Binary coded hexadecimal Complementary code	50 pcs. / pack	3D CAD（Any Model）
⇛S-7071EWC	Side setting	Through hole pin	Binary coded hexadecimal Complementary code	50 pcs. / tray	3D CAD（Any Model）
⇛S-7071EC	Side setting	Through hole pin	Binary coded hexadecimal Complementary code	50 pcs. / pack	3D CAD（Any Model）

Verify the above part numbers when placing orders. Taping and tray version can be supplied only in reel or tray unit.
The products indicated by⇛ mark are manufactured upon　receipt of order basis.