NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

Liste

×

×


Produkte

Verteiler

EU-Deutsch

×

Rotary coded switch S-8000

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal  Überprüfen Sie die Verteiler.
VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.
Gehen Sie zum Farnell Online-Shop.
Gehen Sie zum RS Components Online-Shop.
Gehen Sie zum DigiKey Online-Shop.
Gehen Sie zum MOUSER Online-Shop.

3 bits 8 positions type

  • RoHS compliant
  • 3 bits 8 positions type
  • Protection against dust and washable after soldering
  • DIP-pin configuration: 2.54 mm pitch

Standard specifications

Circuit type BCO (Real code, complementary code)
Operating temperature range − 25 ~ 70 °C
Storage temperature range − 25 ~ 70 °C
Sealing Washable by “O” ring
Net weight

Approx. 0.27 g (S-8010, S-8030) Approx. 0.34 g (S-8110, S-8130)

Approx. 0.33 g (S-8011, S-8031) Approx. 0.40 g (S-8111, S-8131)

Electrical Characteristics

Contact rating Non-switching DC50 V 100 mA
Switching DC5 V 100 mA
MinimumDC20 mV 1 μA
Contact resistance 100 mΩ maximum
Insulation resistance 1000 MΩ (DC100 V) minimum
Dielectric strength AC250 V, 60 s

Mechanical Characteristics

No. of positions 8
Adjustment torque 36 mN·m {367 gf·cm} maximum
Stepping angle 45°
Terminal strength 10 N {1.02 kgf} minimum
Solderability 245 ± 3 °C, 2 ~ 3 s
Soldering heat Flow : 260 ± 3 °C as the temperature in a pot of molten solder, immer sion from head of terminal to backside of board, 5 ~ 6 s, two times maximum
Manual soldering: 380 ± 10 °C, 3 ~ 4 s

Environmental Characteristics

Vibration Amplitude 1.5 mm or Acceleration 98 m/s ,10-500-10 Hz, 3 directions for 2 h each
Shock 490 m/s2, 11 ms 6 directions for 3 times each
Load life 10000 steps minimum DC5 V, 100 mA
Humidity (Steady state) 40 °C, Relative humidity 90 ~ 95 %, 240 h
High temperature exposure 70 °C, 96 h
Low temperature exposure − 25 °C, 96 h
Thermal shock − 25 (0.5 h) ~ 70 °C (0.5 h), 5 cycles

Part number designation

S-8010W

Series name

Shape of rotor

0:Without knob

1:With knob (extended shaft)

Code format

1:Real code

3:Complementary code

Setting position

0:Top setting

1: Side setting

Form of packaging

W:Tray packaging

Blank:Plastic bag

List of part numbers

Part numberCode formatSetting positionShape of rotorPieces in packageCAD
S-8010W Binary coded octal Real code Top setting Without knob 50 pcs./tray
S-8010 Binary coded octal Real code Top setting Without knob 100 pcs./pack
S-8110W Binary coded octal Real code Top setting With knob (extended shaft) 50 pcs./tray
S-8110 Binary coded octal Real code Top setting With knob (extended shaft) 100 pcs./pack
S-8011W Binary coded octal Real code Side setting Without knob 50 pcs./tray
S-8011 Binary coded octal Real code Side setting Without knob 100 pcs./pack
S-8111W Binary coded octal Real code Side setting With knob (extended shaft) 50 pcs./tray
S-8111 Binary coded octal Real code Side setting With knob (extended shaft) 100 pcs./pack
S-8030W Binary coded octal Complementary code Top setting Without knob 50 pcs./tray
S-8030 Binary coded octal Complementary code Top setting Without knob 100 pcs./pack
S-8130W Binary coded octal Complementary code Top setting With knob (extended shaft) 50 pcs./tray
S-8130 Binary coded octal Complementary code Top setting With knob (extended shaft) 100 pcs./pack
S-8031W Binary coded octal Complementary code Side setting Without knob 50 pcs./tray
S-8031 Binary coded octal Complementary code Side setting Without knob 100 pcs./pack
S-8131W Binary coded octal Complementary code Side setting With knob (extended shaft) 50 pcs./tray
S-8131 Binary coded octal Complementary code Side setting With knob (extended shaft) 100 pcs./pack

Terminal connection / p.c.b. through hole dimensions

Environmental Data

●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.

Produkte

×

page top