NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

Liste

×

×


Produkte

Verteiler

EU-Deutsch

×

Lever&rocker switch 8M

Small Lever & Rocker Switches

Some standard accessories were discontinuedCheck affected part number
 
 
FeaturesFeatures

The 8M Small Lever & Rocker Switch is similar to the 8A type except that 8M type has a mounting plate. Levers and rockers are available in four matted colors that give a sober atmosphere. Choose the suitable one for the panel design. For the mounting method, see the following figure.

Screw panel mount

Specifications

Rating Max. Silver: 125VAC 6A / 250VAC 3A / 30VDC 4A
Gold plated:20VDC 25mA
Initial contact resistance Silver: 10mΩ Max.(2~4VDC 1A)
Gold plated:20mΩ Max.(200 μVAC 1.5mA)
Initial dielectric strength AC1500V 1Minute
Initial insulation resistance 1000MΩ Min. (500VDC)
Electrical life Altternate type: 50,000 cycles 
Momentary type: 25,000 cycles
Operating temperature range -30~+85℃
Strage temperature range -40~+85℃

Part Numbering

8M1011 - Z

Series

Actuator shape

M: Small lever / rocker

No. of poles

1: 1 pole

2: 2 poles

Switching function

01: ON-ON

Terminal style

1: Solder

Contact material / Plating

Blank: 

Bs+Ag or Cu+Ag / Silver plated

/ Silver plated

Bs=Brass, Ag=Silver,
Cu=Copper

◆Terminal style

List of Part Numbers

Part No.Number of polesSwitching functionULCSACAD
Part No.:8M1011-Z SPDT ON-ON
Part No.:8M2011-Z DPDT ON-ON
Part No.:8M3011-Z 3PDT ON-ON
Part No.:8M4011-Z 4PDT ON-ON
☆: Semi-standard products
When the UL recognized or CSA certified products are required, specify that effect when placing the order. The products will be delivered with the UL or CSA marking.
UL recognized: File No. E43275 / 
CSA certified: File No. LR38341
Standard Accessories
 

 

 
 
ActuatorPart No.ColorOutline dimensions
Lever 140000050427 White
140000050428 Red
140000050429 Black
140000050450 Gray
Rocker 140000480509 White
140000480510 Red
140000480511 Black
140000480522 Gray
Specify either one of lever or rocker in part number when placing an order.
Please note the part numbers shown in gray background of listed above were no longer selectable for switch orders after December 20, 2023 due to EOL.

Mounting the Lever & Rocker

Press the selvage part of the lever/rocker with a screwdriver to fix it.

Handling Precautions

◆Soldering Specifications
  • Manual Soldering
    Device : Soldering iron
    ①420℃, Max.; 3 sec., Max.
  • Auto Soldering
    ②275℃ ± 10℃, Max.; 5 seconds, Max.
    Note that the above-stated soldering conditions should be applied to the PC terminal type only.
◆Flux Cleaning
  • For the solvent, use the fluorine- or alcohol-based solvent.
    Solvent: Fluorine or Alcohol type
  • Since the 8 Switch Series switches are not waterproof-structured, if the PC board is to be cleaned, clean the soldering surface of substrate with a brush so that the switch is not exposed to the cleaning solution.
◆Mounting
  • Do not bend the terminals before mounting the switch on the PC board.
  • After mounting the switch, do not place the device in such a way that the device weight will be applied on the knob of the switch.
  • To fix the PC terminal type, solder it on the PC board after fixing the switch body on the panel with the screw.

Environmental Data

●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.

Produkte

×

page top