NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

Liste

×

×


Produkte

Verteiler

EU-Deutsch

×

Toggle switch 8F

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal  Überprüfen Sie die Verteiler.
VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.
Gehen Sie zum Farnell Online-Shop.
Gehen Sie zum DigiKey Online-Shop.
Gehen Sie zum MOUSER Online-Shop.

Panel Seal Toggle Switch

A part of this series was discontinuedCheck affected part number
 
 
FeaturesFeatures
  • The 8F series is a panel seal toggle switch with an O-ring to provide drip-proof and dust proof effect (corresponding to IP67 rating). Since a locking ring cannot be used because the panel seal is required, “D-cutting” is provided to the sleeve to prevent the switch from rotating. Note that the switch itself is not waterproof.

  • Suitable for applications where panel space is limited and a larger toggle is needed.

  • Terminal style : Solder, Straight, Right angle and vertical mount PC terminals. Contacts : Silver or gold.

  • Epoxy resin case : UL94V-0 self-extinguishing epoxy.

  • Actuator styles : Over 30 actuator variations.

  • Insulation between terminal and ground : 4 mm minimum. Prevention of flux entry The epoxy resin seal on bottom of the switch helps prevent the entry of solder and flux.

  • Insulation barrier : Insulation barrier design between poles helps prevent short-circuiting between poles ensuring high reliability.

  • UL Recognized product File No.E43275 CSA Certified product File No.LR38341

Part Number Designation

8F1011C- Z

Series

Actuator shape

F: Panel seal toggle

No. of poles

1: 1 pole

2: 2 poles

4: 4 poles

Switching function

01: ON-ON

04: (ON)-OFF-(ON)

06: ON-(ON)

Terminal style

1: Solder

2: PC straight

Contact material / Plating

Blank: 

Bs+Ag or Cu+Ag / Silver plated (Ag)

/ Silver plated (Ag)

C: 

Bs+Ag or Cu+Ag / Gold plated (Ni+Au)

/ Gold plated (Ni+Au)

Bs=Brass, Ag=Silver, Cu=Copper,
Ni=Nickel, Au=Gold

◆Terminals

List of Part Numbers

 

 

 
 
A part number indicated with a gray-back in the list below is discontinued with an order deadline of Dec. 20, 2023.
Part No.No. of polesTerminalsSW functionCAD
Part No.:8F1011-Z 1 pole Solder ON-ON
Part No.:8F1011C-Z 1 pole Solder ON-ON
Part No.:8F1041-Z 1 pole Solder (ON)-OFF-(ON)
Part No.:8F1061-Z 1 pole Solder ON-(ON)
Part No.:8F1012-Z 1 pole PC ON-ON
Part No.:8F2011-Z 2 poles Solder ON-ON
Part No.:8F2041-Z 2 poles Solder (ON)-OFF-(ON)
Part No.:8F2012-Z 2 poles PC ON-ON
Part No.:8F4011-Z 4 poles Solder ON-ON
☆: Semi-standard products / 
★: Made to order products
Optional Accessories
A part number indicated with a gray-back in the list below was discontinued with an order deadline of Dec. 20, 2023.
ActuatorPart No.ColorOutline dimensions
Color Cap 140000470030 White
140000470098 Red
140000470031 Black
140000470037 Gray
140000470038 White
140000470100 Red
140000470039 Black
140000470077 Gray

Common Specifications

Rating Max. Silver Contact:AC125V 6A AC250V 3A DC30V 4A
Gold Contact:AC125V 6A AC250V 3A DC20V 25mA
Initial contact resistance Silver Contact:10mΩ Max. (DC2~4V 1A)
Gold Contact:20mΩ Max. (AC200μV 1.5mA)
Initial dielectric strength AC1500V 1minute
Initial insulation resistance 1000MΩMin. ( DC500V)
Electrical life Alternate type:50,000cycles
Momentary type:25,000cycles
Operating temperature range -30~+85℃
Storage temperature range -40~+85℃

Precautions

Soldering Specifications

  • Manual soldering/Device :Solder iron ①420℃ Max. 3 sec. Max.
  • Auto soldering/275℃ Max. 6 sec. Max.
  • The above-stated soldering conditions shall apply only to switches with straight terminals. Auto soldering is not possible with right-angle terminals. Switches with right-angle terminals should be soldered manually according to the conditions specifi ed in (1) above.
  • When soldering two or more terminals to the common land, use the solder resist to isolate the terminals.。

Flux Cleaning

  • Solvent : Fluorine or Alcohol type.
  • 8A/B/C/D/E/F/J series are not washable. To wash the PC board, clean the soldering surface of the PC board with a brush so that the switch is not exposed to the cleaning solution.
  • Cleaning after soldering should be done after the terminal temperature falls to 90℃ or below, or after leaving the switch for fi ve minutes or longer at room temperature.

Mounting

  • Do not bend the terminals before mounting the switch on the PC board.
  • After mounting the switch, do not place the device in such a way that the device weight will be applied on to the actuator of the switch.
  • For switches with straight terminals, solder the switch on the PC board after fi xing the switch on the panel with a nut.

Panel Cut-Out Dimensions

Panel thickness 5 mm Max.

PC Hole Layouts

Standard Accessories

  • Numbers in the above chart show the quantities of each accessories enclosed with the switch.

8 Series Toggles Selection Table

Environmental Data

●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.

Produkte

×

page top