Trimmpotentiometer CT-6｜NIDEC COMPONENTS EUROPE GmbH

Trimmpotentiometer CT-6

CT-6

CT-6

Kontaktiere uns

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

Low Cost General-Purpose Type

FeaturesFeatures

RoHS compliant
Various configurations to choose from
Wide variety (14 types)
“O” ring sealed and washable
In this series, chemSHERPA downloads are available,
which can be used for REACH-SVHC surveys, etc.
Click to go to the List of Part Numbers below for download

Electrical Characteristics

Nominal resistance range	10 Ω ~ 2 MΩ
Resistance tolerance	± 10 %
Power ratings	0.5 W (70 °C) 0 W (120 °C)
Resistance law	Linear law（B）
Maximum input voltage	DC200 V or power rating, whichever is smaller
Maximum wiper current	100 mA or power rating, whichever is smaller
Effective electrical angle	220 ° (1 turn)
End resistance	1 % or 2 Ω , whichever is greater
C.R.V.	1 % or 3 Ω , whichever is greater
Operating temp. range	−55 ~ 120 °C
Temp. coefficient	10 Ω ~ 20 Ω : ± 250 10-6/°C maximum 50 Ω ~ 2 MΩ : ± 100 10-6/°C maximum
Insulation resistance	1000 MΩ minimum (DC500 V)
Dielectric strength	AC500 V, 60 s
Net weight	Approx. 0.51 g (CT-6EP, EW, ER, EV) Approx. 0.65 g (CT-6ES, EX, EH, EN) Approx. 0.92 g (CT-6EF)

Mechanical Characteristics

Mechanical angle	260 ° (1 turn)
Operating torque	2 ~ 20 mN·m {20 ~ 204 gf·cm}
Stop strength	50 mN･m {20 ~ 204 gf·cm} minimum
Rotational life	200 cycles [ΔR/R ≦ ± (2 Ω +3 %)]
Teminal strength	10 N {1.02 kgf} minimum（Tensile strength）
Thrust to rotor	10 N {1.02 kgf} minimum
Solderability	245 ± 3 °C, 2 ~ 3 s

{ }: Reference only

Environmental Characteristics

Test item	Test conditions	Specifications
Thermal shock	−65 ~ 125 °C(0.5 h), 5 cycles	[Δ R/R ≦ 1 %] [S.S. ≦ 1 %]
Humidity	−10 ~ 65 °C (Relative humidity 80 ~ 98 %), 10 cycles, 240 h	[Δ R/R ≦ 2 %]
Shock	981 m/s2, 6 ms ,6 directions for 3 times each	[Δ R/R ≦ 1 %] [S.S. ≦ 1 %]
Vibration	Amplitude 1.52 mm or Acceleration 196 m/s², 10 ~ 2000 Hz, 3 directions, 12 times each	[Δ R/R ≦ 1 %] [S.S. ≦ 1 %]
Load life	70 °C, 0.5 W, 1000 h	[Δ R/R ≦ 3 %] [S.S. ≦ 1 %]
Low temp. operation	−55 °C, 2 h	[Δ R/R ≦ 2 %] [S.S. ≦ 2 %]
High temp. exposure	120 °C, 250 h	[Δ R/R ≦ 3 %] [S.S. ≦ 2 %]
Immersion seal	85 °C, 60 s	No leaks (No continuous bubbles)
Soldering heat	Flow soldering :260 ± 3 °C, 5 ~ 6 s, two times Max. Manual soldering : 380 ± 10 °C, 3 ~ 4 s	[Δ R/R ≦ 1 %]

Δ R/R: Change in total resistance
S.S.: Setting stability

Maximum Input Ratings

Nominal resistance values(Ω)	Resistance code	Maximum input voltage (V)	Maximum wiper current(mA)
10※	100	1.00	100
20※	200	2.00	100
50	500	5.00	100
100	101	7.07	70.7
200	201	10.0	50.0
500	501	15.8	31.6
1k	102	22.4	22.4
2k	202	31.6	15.8
5k	502	50.0	10.0
10k	103	70.7	7.07
20k	203	100	5.00
50k	503	158	3.16
100k	104	200	2.00
200k	204	200	1.00
500k	504	200	0.40
1M	105	200	0.20
2M	205	200	0.10

The products indicated by ※ mark are manufactured upon receipt of order basis.

Part Number Designation

CT-6	E	T	A	5 kΩ (502)
Series	Terminal pins E: Sn (Lead-free)	Packaging form T: Taping (Ammo pack type) M: Magazine (Stick) Blank: Bulk in plastic bag	Adjust position P: Top adjustment S: Side adjustment W: Top adjustment X: Side adjustment R: Top adjustment H: Side adjustment V: Top adjustment N: Side adjustment F: Rear adjustment *Classified by pin position	Resistance value (Resistance code)

CT-6

5 kΩ (502)

Series

Terminal pins

Sn (Lead-free)

Packaging form

T: Taping (Ammo pack type)

M: Magazine (Stick)

Blank:

Bulk in plastic bag

Adjust position

P: Top adjustment

S: Side adjustment

W: Top adjustment

X: Side adjustment

R: Top adjustment

H: Side adjustment

V: Top adjustment

N: Side adjustment

F: Rear adjustment

*Classified by pin position

Resistance value (Resistance code)

List of Part Numbers

Nominal resistance values	10 Ω, 20 Ω, 50 Ω, 100 Ω, 200 Ω, 500 Ω, 1 kΩ, 2 kΩ, 5 kΩ, 10 kΩ, 20 kΩ, 50 kΩ, 100 kΩ, 200 kΩ, 500 kΩ, 1 MΩ, 2 MΩ

When ordering, please be sure to include the above nominal resistance value at the end of the part number below. *10 Ω item, 20 Ω item are made to order.

Downloads of chemSHERPA (e.g. for REACH-SVHC surveys) are available below. *Need to log in to download.

Part No.	Adjustment position	Packaging form	Packaging quantity	Remarks	REACH-SVHC	CAD
CT-6ETP	Top adjust	Taping*	1000 pcs./reel	The pin length of CT-6ETP and CT-6EMP is different from CT-6EP.	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6EMP	Top adjust	Magazine	75 pcs./stick	The pin length of CT-6ETP and CT-6EMP is different from CT-6EP.	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6EP	Top adjust	Bulk	50 pcs./pack	The pin length of CT-6ETP and CT-6EMP is different from CT-6EP.	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6EW	Top adjust	Bulk	50 pcs./pack	-	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6ER	Top adjust	Bulk	50 pcs./pack	-	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6EV	Top adjust	Bulk	50 pcs./pack	-	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6ETV	Top adjust	Taping*	1000 pcs./reel	-	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6EMS	Side adjust	Magazine	75 pcs./stick	The pin length of CT-6EMS is different from CT-6ES.	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6ES	Side adjust	Bulk	50 pcs./pack	The pin length of CT-6EMS is different from CT-6ES.	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6EX	Side adjust	Bulk	50 pcs./pack	-	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6ETH	Side adjust	Taping*	1000 pcs./reel	The pin length of CT-6ETH is different from CT-6EH.	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6EH	Side adjust	Bulk	50 pcs./pack	The pin length of CT-6ETH is different from CT-6EH.	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6EN	Side adjust	Bulk	50 pcs./pack	-	chemSHERPA （shai file）	3D CAD（Any Model）
CT-6EF	Rear adjust	Bulk	50 pcs./pack	-	chemSHERPA （shai file）	3D CAD（Any Model）