Druckschalter PS60｜NIDEC COMPONENTS EUROPE GmbH

Druckschalter PS60

Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 24 V DC.

Item	102R	302R	103R
Pressure reference	Gauge
Rated pressure range	−100 ~ 100kPa	−100 ~ 300kPa	−100 ~ 1000kPa
Maximum pressure	200kPa	600kPa	1500kPa
Break-down pressure	500kPa	1000kPa	2000kPa
Operating temp. range	−10 ~ 50°C
Compensated temp. range	0 ~ 50°C
Operating humidity	35 ~ 85%RH（No condensation）
Storage temp.	−20 ~ 70°C（Atmospheric pressure, humidity 65 %RH maximum））
Pressure medium	Non-corrosive gases
Insulation resistance	100 MΩ min.(500 V DC)
Thermal error	± 3 %F.S. (0 ~ 50 °C)
Dielectric strength	500 V AC, 60 s（Leakage current 1 mA maximum）
Pressure port	M5 Female screw
Net weight	Approx. 50g（Includihg cable）
Supply voltage	12 ~ 24 V ± 10 %（Including ripple percentage）
Consumption current	30mA max.
Accessories	PS60 cable, DIN rail adaptor

Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 24 V DC.

No. of outputs	2
Output interface	Open collector output (NPN or PNP)
Setting method	Adjustable by panel switch
Adjustable range	−110 kPa (approx.) ~ “999” counts
Display	Red LED ON
Repeatability	± 0.3 %F.S. maximum
Switch hysteresis	0 ~ 30 counts
Switching capacity	30 V 100 mA maximum
Residual voltage	1.2 V maximum(NPN), 2.2V maximum (PNP)
Response	Approx. 5, 25, 250ms

Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 24 V DC.

Item	102R	302R	103R
Display element	3-digit LED
Rated display range	−100 ~ 100 kPa	−100 ~ 300 kPa	−0.10 ~ 1.00 MPa
Display accuracy　0 〜 50℃ (Reference temp. 25℃)	± 1 %F.S.
Resolution	1 count

Test item	Test conditions	Permissible change
Vibration	10 ~ 500 Hz, 1.5 mm maximum/98.1 m/s² , 3 directions for 2 hours each	Pressure indication and switch operating output : ± 2 %F.S., maximum each after test
Shock	196 m/s² , 3 directions for 3 times each
Moisture resistance	40 °C, 90 ~ 95 %RH, 240 hrs
Pressure cycling	0 ~ Rated pressure, 10⁶ cycles
EMC	EMI : EN55011: 2007, A2 : 2007 Group 1, class B EMS : EN61326-1 : 2006 Table 2	Pressure indication and switch operating output, alalog output : ± 5 %F.S., maximum during test

PS60-	102	R-	N	M	CN
Series name	Rated pressure range 102：−100 ~ 100 kPa 103：−100 ~ 1000 kPa 302：−100 ~ 300 kPa	Pressure reference R：Compound pressure (Negative pressure ~ Positive pressure)	Switch output interface N：NPN open collector P：PNP open collector	Pressure port M：M5 female screw	Signal / power cable pullout method CN：Connector pullout

PS60-

102

R-

Series name

Rated pressure range

102：−100 ~ 100 kPa

103：−100 ~ 1000 kPa

302：−100 ~ 300 kPa

Pressure reference

R：Compound pressure (Negative pressure ~ Positive pressure)

Switch output interface

N：NPN open collector

P：PNP open collector

Pressure port

M：M5 female screw

Signal / power cable pullout method

CN：Connector pullout

Model number	Rated pressure	Pressure port	Output interface	CAD
PS60-102R-NMCN	−100 ~ 100 kPa	M5 Female screw	NPN	3D CAD（Any Model）
PS60-102R-PMCN	−100 ~ 100 kPa	M5 Female screw	PNP	3D CAD（Any Model）
PS60-302R-NMCN	−100 ~ 300 kPa	M5 Female screw	NPN	3D CAD（Any Model）
PS60-302R-PMCN	−100 ~ 300 kPa	M5 Female screw	PNP	3D CAD（Any Model）
PS60-103R-NMCN	−100 ~ 1000 kPa	M5 Female screw	NPN	3D CAD（Any Model）
PS60-103R-PMCN	−100 ~ 1000 kPa	M5 Female screw	PNP	3D CAD（Any Model）

Note 1. In the Separate Mode, setting 1 corresponds to SW1, and Setting 2 corresponds to SW2.
Note 2. In the Window Comparator Mode, the minimum value for SW1 and SW2 corresponds to Setting 1 and the maximum value corresponds to Setting 2.

Display range can be selected as the table.
Note) “–” on the table indicates that it is not selectable in relation to resolution and display lines.
※ : In terms of setting display range, please verify the default mode.